SAFETY INSTRUCTIONS

1 Undo the bar nuts that hold the clutch cover and chain brake, using the combination spanner. Then tighten the nuts by hand as tight as you can.

2 Raise the tip of the bar and stretch the chain by tightening the chain tensioning screw using the combination spanner. Tighten the chain until it hangs slack on the underside of the bar.

3Use the combination spanner to tighten the bar nuts while lifting the tip of the bar at the same time. Check that you can pull

the chain round freely by hand and that it is not slack on the bottom of the bar.

The position of the chain tensioning screw varies from model to model. See the” What is what” section to find out where it is on your saw.

4Lubricating cutting equipment

!Poor lubrication of cutting equipment may cause the chain to snap and lead to serious, even fatal injuries.

A Chain oil

•Chainsaw chain oil must demonstrate good adhesion to the chain and also maintain its flow caracteristics regardless of whether it is warm summer or cold winter weather.

•As a chainsaw manufacturer we have developed an optimal chain oil which, with its vegetable oil base, is also biodegradable. We recommend the use of our own oil for both maximum chain life and to minimise environmental damage.

•If our own chain oil is not available, standard chain oil is recommended.

•In areas where oil specifically for lubrication of saw chains is unavailable, ordinary EP 90 transmission oil may be used.

•Never use waste oil!

This is dangerous for yourself, the saw and the environment.

BFilling with chain oil

• All our chain saws have an automatic chain lubrication system. On some models the oil flow is also adjustable.

•The sizes of the chain oil tank and fuel tank have been chosen so that the saw will run out of fuel before running out of oil. This means that you should never run with a dry chain.

However, this safety feature requires that you use the right sort of chain oil (if the oil is too thin it will run out before the fuel), and that you adjust the carburetor as recommended (a weak

mixture may mean that the fuel lasts longer than the oil). You should also use the recommended cutting equipment (a bar that is too long will use more chain oil). The above conditions also apply to models with an adjustable oil pump.

14 – English

Page 13 Page 15
Page 14
Image 14
Jonsered 2054 manual Lubricating cutting equipment, Chain oil, Filling with chain oil, Never use waste oil
Page 13 Page 15

2054 specifications

The Jonsered 2054 is a high-performance chainsaw designed for both residential and professional use, offering a blend of power, reliability, and advanced technology. Known for its durability and efficiency, the 2054 has garnered a reputation among users who require effective cutting tools for various tasks, from tree felling to firewood preparation.

One of the standout features of the Jonsered 2054 is its powerful engine. Equipped with a robust 54cc two-stroke engine, it delivers impressive power to tackle demanding cutting jobs with ease. The engine is designed with advanced fuel technology, allowing for a more efficient combustion process that not only increases power output but also improves fuel economy. This ensures that users can work longer without frequent refueling, making it an ideal choice for extended use.

The chainsaw incorporates a low-vibration system, which significantly reduces user fatigue during operation. This technology dampens vibrations produced during cutting, ensuring a smoother experience and promoting more precise cuts. The ergonomic handle design further enhances comfort, allowing users to maintain a firm grip without straining their hands over prolonged periods.

Safety is a top priority with the Jonsered 2054, as it is equipped with several protective features. The chainsaw comes with a chain brake mechanism that halts chain movement in the event of kickback, minimizing the risk of injury. Additionally, the easy-access air filter and tool-less chain tensioning system simplify maintenance tasks, allowing users to keep their equipment in top condition without the hassle of complicated procedures.

The Jonsered 2054 also boasts a powerful cutting system, utilizing a high-quality cutting chain and bar that ensures smooth and efficient cutting. The balanced design of the saw contributes to its maneuverability, enabling users to navigate tight spaces with ease when performing detailed work.

Overall, the Jonsered 2054 combines power, comfort, and safety in a well-engineered package. It's a versatile tool suited for a wide range of cutting tasks, and its advanced technologies ensure that it delivers consistent performance even under challenging conditions. Whether for personal or professional use, the Jonsered 2054 is a reliable choice that meets the demands of modern forestry and landscaping needs.
Top Page Image Contents