Basic cutting technique, General, Terms, Cutting

SAFETY INSTRUCTIONS

2 Basic cutting technique

General

•Always use full throttle when cutting!

•Reduce the speed to idle after every cut (running the engine for too long at full throttle without any load can lead to serious engine damage).

•Cutting from above = Cutting on the pull stroke.

•Cutting from below = Cutting on the push stroke.

See the section on ”How to avoid kickback” to find out why cutting on the push stroke increases the risk of kickback.

Terms:

Cutting	=	General term for cutting through wood.
Limbing	=	Cutting limbs off a felled tree.
Splitting	=	When the object you are cutting breaks off
		before the cut is complete.

There are five important factors you should consider before making a cut:

1 Make sure the bar will not jam in the cut.

2 Make sure the log will not split.

3 Make sure the chain will not strike the ground or any other object during or after cutting.

4Is there a risk of kick- back?

5Do the conditions and surrounding terrain affect your safety when working?

Two factors decide whether the chain will jam or the log will split. The first is how the log is supported and the second is whether it is in tension.

In most cases you can avoid these problems by cutting in two stages; from the top and from the bottom of the log. You need to support the log so that it will not trap the chain or split during cutting.

!If the chain jams in the cut:

STOP THE ENGINE! Don’t try to pull the saw free. If you do you may damage the chain when the saw suddenly breaks free. Use a lever to open up the cut and free the bar.

The following instructions describe how to handle most types of situation that you will be faced with when using a chain saw.

Cutting

1 The log is lying on the ground. There is little risk of the chain jamming or the log splitting. However there is a risk that the chain will touch the ground when you finish the cut.

Cut all the way through the log from above. Try not to touch the ground as you finish the cut. Maintain full throttle but be prepared in case the chain snatches.

A If it is possible to turn the log you should stop cutting about 2/3 of the way through.

BTurn the log and finish the cut from the

opposite side.

20 – English

2054 specifications

The Jonsered 2054 is a high-performance chainsaw designed for both residential and professional use, offering a blend of power, reliability, and advanced technology. Known for its durability and efficiency, the 2054 has garnered a reputation among users who require effective cutting tools for various tasks, from tree felling to firewood preparation.

One of the standout features of the Jonsered 2054 is its powerful engine. Equipped with a robust 54cc two-stroke engine, it delivers impressive power to tackle demanding cutting jobs with ease. The engine is designed with advanced fuel technology, allowing for a more efficient combustion process that not only increases power output but also improves fuel economy. This ensures that users can work longer without frequent refueling, making it an ideal choice for extended use.

The chainsaw incorporates a low-vibration system, which significantly reduces user fatigue during operation. This technology dampens vibrations produced during cutting, ensuring a smoother experience and promoting more precise cuts. The ergonomic handle design further enhances comfort, allowing users to maintain a firm grip without straining their hands over prolonged periods.

Safety is a top priority with the Jonsered 2054, as it is equipped with several protective features. The chainsaw comes with a chain brake mechanism that halts chain movement in the event of kickback, minimizing the risk of injury. Additionally, the easy-access air filter and tool-less chain tensioning system simplify maintenance tasks, allowing users to keep their equipment in top condition without the hassle of complicated procedures.

The Jonsered 2054 also boasts a powerful cutting system, utilizing a high-quality cutting chain and bar that ensures smooth and efficient cutting. The balanced design of the saw contributes to its maneuverability, enabling users to navigate tight spaces with ease when performing detailed work.

Overall, the Jonsered 2054 combines power, comfort, and safety in a well-engineered package. It's a versatile tool suited for a wide range of cutting tasks, and its advanced technologies ensure that it delivers consistent performance even under challenging conditions. Whether for personal or professional use, the Jonsered 2054 is a reliable choice that meets the demands of modern forestry and landscaping needs.

Jonsered 2054 manual Basic cutting technique, General, Terms, Cutting

Models: 2054