MAINTENANCE

Starter device

!WARNING!

•When the recoil spring is assembled in the starter housing, it is in tensioned position and can when treated carelessly, pop out and cause injuries.

•Always be careful, when changing the recoil spring or the starter cord. Always wear safety goggles for eye protection.

Changing a broken or worn starter cord

• Loosen the screws, that hold the starter device against the crankcase and remove the starter device.

• Pull out the cord approx. 30 cm and lift it up into the notch in the pulley. Zero-set the recoil spring by letting the pulley rotate slowly backwards. Undo the screw in the centre of the pulley and remove the pulley.

• Insert and fasten a new starter cord in the pulley. Wind approx. 3 turns of the starter cord on to the pulley. Assemble the starter pulley against the recoil spring, so the end of the spring engages to the pulley. Fit the screw in the centre of the pulley. Carry the starter cord through the hole in the starter housing and the starter handle. Make a knot on the starter cord.

Tensioning the recoil spring

•Lift the starter cord up in the notch on the starter pulley and turn the starter

pulley 2 turns clockwise.

NOTE! Check that the starter pulley can be turned at least half a turn, when the starter cord is entirely pulled out.

Changing the broken recoil spring

• Lift the starter pulley. (See, Changing a broken or worn starter cord). The recoil spring is disassembled from the starter device, with its inside facing down. Tap the starter lightly against a working bench or similar.

•Put a new recoil spring in the right position. If the spring pops out when assembling, it should be mounted again, out and in towards the centre.

•Lubricate the recoil spring with thin oil. Assemble the

starter pulley, and tension the recoil spring.

Starter device assembly

•Assemble the starter device, by pulling the starter cord out first, then place the starter against the crankcase. Then slowly

release the starter cord so that the pulley engages with the pawls.

•Assemble and tighten the screws, which hold the starter.

30 – English

Page 29 Page 31
Page 30
Image 30
Jonsered 625, 670, 630 Changing a broken or worn starter cord, Tensioning the recoil spring, Starter device assembly
Page 29 Page 31

630, 670, 625 specifications

The Jonsered 625, 670, and 630 chainsaws represent a robust line of products designed specifically for both professional and amateur users who require reliability, power, and efficiency in their cutting tasks. These models are a testament to Jonsered's commitment to innovation and performance in the forestry and outdoor equipment sector.

The Jonsered 625 features a compact design, making it ideal for users who need a lightweight tool for trimming, pruning, or cutting smaller trees. This model is equipped with a powerful engine that delivers an impressive power-to-weight ratio, enabling users to handle tough jobs without feeling fatigued. One of the standout features of the 625 is its ergonomic design, including a comfortable handle and optimized balance, which significantly reduces operator strain during extended use.

Meanwhile, the Jonsered 670 is tailored for those who need a bit more power and capacity. It is versatile enough to handle medium-sized cutting tasks as well as heavy-duty use. This model is designed with advanced vibration dampening technology, minimizing vibrations transferred to the user's hands, thus enhancing comfort and precision. The 670 also incorporates the Easy Start system, which makes starting the saw simple, even after long periods of inactivity.

The Jonsered 630 stands at the higher end of this trio, aimed at professional users who demand peak performance. With an increased engine size and enhanced cutting speed, the 630 can tackle larger trees and tougher materials with ease. This model features a high-performance air filtration system that ensures the engine remains clean and runs efficiently. Additionally, the 630 incorporates a centrifugal air cleaning system that prolongs service intervals and reduces maintenance needs.

All three models come equipped with cutting-edge technologies such as the X-Torq engine, which lowers fuel consumption and exhaust emissions, making them environmentally friendly options in today's market. These chainsaws incorporate safety features like chain brakes and low kickback chains, ensuring user safety during operation.

In summary, the Jonsered 625, 670, and 630 chainsaws each offer distinct advantages catering to various user needs, from homeowners tackling light-duty tasks to professionals requiring robust, high-performance machinery. The blend of technology, ergonomic design, and safety ensures that Jonsered continues to be a trusted name in outdoor power equipment. These chainsaws not only deliver superior cutting performance but also provide a seamless user experience.
Top Page Image Contents