FUEL HANDLING

Fuelmix

IMPORTANT! The chain saw is equipped with a two-stroke engine and must always been run using a mixture of gasoline and two-stroke engine oil. It is important to accurately measure the amount of oil to be mixed to ensure that the correct mixture is obtained. When mixing small amounts of fuel, even small inaccuracies can drastically affect the ratio of the mixture.

Always provide for good ventilation when handling fuel.

Gasoline

•This engine is certified to operate on unleaded gasoline.

•Use good quality unleaded

gasoline.

•The lowest recommended

octane rating is 87. If you run the engine on lower octane rating than 87 so- called “knocking“ can occur. This leads to an increased engine temperature, which can result in a serious engine breakdown.

•When working at continuous high revs a higher octane rating is recommended.

Two-stroke oil

•For the best results use JONSERED two-stroke oil, which is especially developed for chain saws. Mixing ratio 1:50 (2%).

•Never use two-stroke oil intended for water cooled outboard engines, so-called, outboard oil.

•Never use oil intended for four-stroke engines.

Gasoline

Oil

2%(1:50)

Lit.

Lit.

50,10

10

0,20

15

0,30

20

0,40

US

US

gallon

fl. oz.

12 1/2

2 1/2

6 1/2

512 7/8

Mixing

•Always mix the gasoline and oil in a clean container intended for fuel.

•Always start by filling half the amount of the gasoline to be used. Then add the entire amount of oil. Mix (shake) the fuel mixture. Add the remaining amount of gasoline.

•Mix (shake) the fuel mixture thoroughly before filling the saw’s fuel tank.

•Do not mix more than max. one month’s supply of fuel.

•If the saw is not used for some time the fuel tank should be emptied and cleaned.

•This engine is certified to operate on unleaded gasoline.

Chain oil

•The chain lubrication system is automatic. Always use special chain oil with good adhesive characteristics.

•In countries where no special chain oil is available, EP 90 transmission oil can be used.

•Never use waste oil. This results in damage to the oil pump, the bar and the chain.

•It is important to use oil of the right viscosity according to the air temperature.

•In temperatures below 0oC (32oF) some oils become too viscous. This can overload the oil pump and result in damage to the oil pump components.

•Contact your servicing dealer when choosing chain oil.

26 – English

Page 25 Page 27
Page 26
Image 26
Jonsered CS 2186 manual Fuel Handling, Fuelmix
Page 25 Page 27

CS 2186 specifications

The Jonsered CS 2186 is a versatile chainsaw designed to meet the needs of both professional and recreational users. Known for its robust performance and user-friendly features, this saw showcases great engineering and innovative technology.

One of the standout features of the CS 2186 is its powerful engine. Incorporating a 50.2 cc engine, it delivers an impressive power output that allows smooth cutting through wood of varying densities. This engine is designed with modern technology to ensure efficient fuel consumption, reducing emissions without compromising performance.

The chainsaw is equipped with a 16 to 20-inch bar, providing options for different cutting applications. Whether for tree felling, limbing, or firewood preparation, the adjustable bar length makes the CS 2186 a flexible choice suited for a variety of tasks. The specific chain design promotes an excellent cutting experience, combining sharpness and durability.

Comfort and ease of use are also priorities for the Jonsered CS 2186. The chainsaw features an ergonomic handle with anti-vibration technology, which minimizes fatigue during prolonged use. Users can work longer and with more control, enhancing overall safety and precision in cutting.

Another noteworthy technology is the Easy Start system, which significantly reduces the effort needed to start the engine. This is especially beneficial for those who may struggle with traditional starting methods. Additionally, the chainsaw includes an automatic oiler that ensures proper lubrication of the chain, contributing to both efficiency and longevity of the equipment.

Safety is paramount in chainsaw design, and the CS 2186 incorporates multiple safety features. It includes a chain brake that acts immediately in case of kickback, preventing serious injuries. The front-hand guard and throttle lock further enhance safety by providing additional protection and control.

Overall, the Jonsered CS 2186 stands out for its blend of power, innovative technologies, and user-focused design. This chainsaw represents an excellent investment for anyone in need of a reliable, efficient, and safe cutting tool capable of performing a variety of jobs effectively. Whether you're a landowner, professional lumberjack, or simply enjoy working with wood, the CS 2186 is a commendable choice that exemplifies quality and performance in the world of chainsaws.
Top Page Image Contents