MAINTENANCE

Starter device

WARNING!

•When the recoil spring is assembled in the starter housing, it is in tensioned position and can when treated carelessly, pop out and cause injuries.

•Always be careful, when changing the recoil spring or the starter cord. Always wear safety goggles for eye protection.

Changing a broken or worn starter cord

• Loosen the screws, that hold the starter device against the crankcase and remove the starter device.

• Pull out the cord approx. 30 cm and lift it up into the notch in the pulley. Zero-set the recoil spring by letting the pulley rotate slowly backwards. Undo the screw in the centre of the pulley and remove the pulley.

•Insert and fasten a new

starter cord in the pulley. Wind approx. 3 turns of the starter cord on to the pulley. Assemble the starter pulley against the recoil spring, so the end of the spring engages to the pulley. Fit the screw in the centre of the pulley. Carry the starter cord through the hole in the starter housing and the starter handle. Make a knot on the starter cord.

Tensioning the recoil spring

•Lift the starter cord up in the notch on the starter pulley and turn the starter pulley 2 turns clockwise.

NOTE! Check that the starter pulley can be turned at least half a turn, when the starter cord is entirely pulled out.

Changing the broken recoil spring

•Lift the starter pulley (see

"Changing a broken or worn starter cord").

•Dissasemble the recoil

spring by tapping the pully (with its inside facing down) lightly against a working bench or similar. If the spring pops out when assembling, it should be mounted again, out and in towards the centre.

•Lubricate the recoil spring with thin oil. Assemble the starter pulley, and tension the recoil spring.

Starter device assembly

•Assemble the starter device, by pulling the starter

cord out first, then place the starter against the crankcase. Then slowly release the starter cord so that the pulley engages with the pawls.

• Assemble and tighten the screws, which hold the starter.

30 – English

Page 29 Page 31
Page 30
Image 30
Jonsered CS 2186 manual Starter device, Changing a broken or worn starter cord, Tensioning the recoil spring
Page 29 Page 31

CS 2186 specifications

The Jonsered CS 2186 is a versatile chainsaw designed to meet the needs of both professional and recreational users. Known for its robust performance and user-friendly features, this saw showcases great engineering and innovative technology.

One of the standout features of the CS 2186 is its powerful engine. Incorporating a 50.2 cc engine, it delivers an impressive power output that allows smooth cutting through wood of varying densities. This engine is designed with modern technology to ensure efficient fuel consumption, reducing emissions without compromising performance.

The chainsaw is equipped with a 16 to 20-inch bar, providing options for different cutting applications. Whether for tree felling, limbing, or firewood preparation, the adjustable bar length makes the CS 2186 a flexible choice suited for a variety of tasks. The specific chain design promotes an excellent cutting experience, combining sharpness and durability.

Comfort and ease of use are also priorities for the Jonsered CS 2186. The chainsaw features an ergonomic handle with anti-vibration technology, which minimizes fatigue during prolonged use. Users can work longer and with more control, enhancing overall safety and precision in cutting.

Another noteworthy technology is the Easy Start system, which significantly reduces the effort needed to start the engine. This is especially beneficial for those who may struggle with traditional starting methods. Additionally, the chainsaw includes an automatic oiler that ensures proper lubrication of the chain, contributing to both efficiency and longevity of the equipment.

Safety is paramount in chainsaw design, and the CS 2186 incorporates multiple safety features. It includes a chain brake that acts immediately in case of kickback, preventing serious injuries. The front-hand guard and throttle lock further enhance safety by providing additional protection and control.

Overall, the Jonsered CS 2186 stands out for its blend of power, innovative technologies, and user-focused design. This chainsaw represents an excellent investment for anyone in need of a reliable, efficient, and safe cutting tool capable of performing a variety of jobs effectively. Whether you're a landowner, professional lumberjack, or simply enjoy working with wood, the CS 2186 is a commendable choice that exemplifies quality and performance in the world of chainsaws.
Top Page Image Contents