Repair instructions

7.8 Ignition module and flywheel

– refitting

1

Fit the flywheel on the crankshaft journal. Turn the flywheel so that the key lines up with the keyway in the shaft.

Fit the nut on the shaft and tighten to a torque of 25-30 Nm (see figure 11).

Fig 11

2

To refit the ignition module proceed as follows:

Turn the flywheel so that the magnets are in line with the ignition module. Fit the ignition module with the plastic feeler gauge (502 51 34- 02) held in position at the same time, without tightening the bolts. Fit the earth cable (black) (A). Set a distance of 0.3 +/- 0.1 mm, between the ignition module and magnet. The measurement applies to the two lowest lugs on the ignition module. Tighten the screws, tightening torque 4.5–6 Nm. Fit the blue cable on the ignition module (see figure 12).

3

Then refit:

• cable guide and press the leads into position

• HT lead

• starter assembly, tighten to a torque of 2.5–3.5 Nm

• cylinder cover

Fig

12

When replacing the cables, they are fitted on the stop switch as shown in middle figure on the pre- vious page.

English – 29

Page 27 Page 29
Page 28
Image 28
Jonsered CS 2240 manual Ignition module and flywheel Refitting
Page 27 Page 29

CS 2240 specifications

The Jonsered CS 2240 is a powerful and versatile chainsaw designed for homeowners, landscapers, and property maintenance professionals. It stands out in the market due to its unique combination of performance-oriented technology, ergonomic design, and ease of use.

One of the main features of the Jonsered CS 2240 is its robust engine. With a 40.9cc X-Torq® engine, this chainsaw is designed to provide efficient power and performance while minimizing fuel consumption and emissions. The X-Torq® engine technology not only enhances the chainsaw's acceleration and torque but also contributes to better fuel efficiency, making it an environmentally friendly option for users.

The CS 2240 is equipped with a 16-inch bar, which strikes a perfect balance for various cutting tasks, whether it's felling small trees, trimming branches, or performing general maintenance. This length also allows for greater maneuverability in tight spaces, making it an ideal choice for homeowners and professional users alike.

A notable aspect of the Jonsered CS 2240 is its innovative starting system. The Quick Release Air Filter ensures that the air filter can be easily accessed for maintenance, promoting optimal engine performance. Coupled with the Air Injection system, which filters out larger debris before it enters the engine, this chainsaw maintains a longer lifespan and reduces the frequency of required maintenance.

Safety is paramount in chainsaw design, and Jonsered does not compromise on that front. The CS 2240 features a chain brake, which halts the chain movement in the event of kickback. Additionally, the front handguard provides an extra layer of protection, ensuring that users can operate the saw with confidence.

The ergonomic design of the CS 2240 incorporates a comfortable handle that reduces vibrations, allowing for extended use without excessive fatigue. Weighing approximately 10.8 lbs, it strikes the right balance between power and portability.

In summary, the Jonsered CS 2240 is an excellent choice for those seeking a reliable, efficient, and user-friendly chainsaw. Its advanced engine technology, balanced bar length, safety features, and ergonomic design make it a standout in its class, ideal for tackling a variety of cutting tasks with ease and efficiency. Whether you are a casual user or a professional, the CS 2240 is well-equipped to meet diverse cutting needs while ensuring safety and comfort.
Top Page Image Contents