GENERAL SAFETY PRECAUTIONS

For mufflers it is very important that you follow the instructions on checking, maintaining and servicing your machine. See instructions under the heading Checking, maintaining and servicing the machine’s safety equipment.

Never use a machine that has a faulty muffler.

Regularly check that the muffler is securely attached to the machine.

If the muffler on your machine is fitted with a spark arrestor mesh this must be cleaned regularly. A blocked mesh will cause the engine to overheat and may lead to serious damage.

WARNING! Mufflers fitted with catalytic

!converters get very hot during use and remain so for some time after stopping. This also applies at idle speed. Contact can result in burns to the skin. Remember the risk of fire!

WARNING! The inside of the muffler contain

!chemicals that may be carcinogenic. Avoid contact with these elements in the event of a damaged muffler.

Locking nut

A locking nut is used to secure some types of cutting attachment.

When fitting, tighten the nut in the opposite direction to the direction of rotation of the cutting attachment. To remove it, undo the nut in the same direction as the cutting attachment rotates. (CAUTION! The nut has a left-hand thread.)

When loosening and tightening the saw blade nut, there is a risk of injury from the teeth of the saw blade. You should therefore always ensure that your hand is shielded by the blade guard when doing this. Always use a socket spanner with a shaft that is long enough to allow this. The arrow in the diagram shows the area where you should operate the socket spanner when loosening or tightening the nut.

The nylon lining inside the locking nut must not be so worn that you can turn it by hand. The lining should offer a resistance of at least 1.5 Nm. The nut should be replaced after it has been put on approx. 10 times.

Locking screw

!

WARNING! Bear in mind that:

Engine exhaust fumes contain carbon monoxide, which can cause carbon monoxide poisoning. For this reason you should not start or run the machine indoors, or anywhere that is poorly ventilated.

The exhaust fumes from the engine are hot and may contain sparks which can start a fire. Never start the machine indoors or near combustible material!

The lock screw must be tightened securely for ball-bearing- mounted support cups.

10 – English

Page 9 Page 11
Page 10
Image 10
Jonsered GR50 manual Locking nut, Locking screw
Page 9 Page 11

GR50 specifications

The Jonsered GR50 is a robust and versatile garden tractor that caters to the needs of both residential and professional gardeners. Designed for performance, the GR50 merges comfort and advanced technology, making it a popular choice among gardening enthusiasts.

One of the standout features of the Jonsered GR50 is its powerful engine. It comes equipped with a high-performance overhead valve engine that provides excellent torque and reliability. This engine ensures that the tractor can handle various terrain types and grass heights, making it ideal for both small and large lawns. Additionally, the high-efficiency engine minimizes fuel consumption while maximizing power output, making it an economical choice for users.

The GR50 offers an impressive cutting deck, which is available in various sizes to meet different mowing needs. The adjustable cutting height allows users to customize the grass length, ensuring a clean and even cut every time. The cutting deck design incorporates anti-scalp wheels, which help to prevent turf damage, especially on uneven surfaces. This feature is crucial for maintaining a healthy lawn and enhancing the overall appearance of outdoor spaces.

One of the key technologies integrated into the Jonsered GR50 is its hydrostatic transmission, which provides smooth and uninterrupted speed control. Users can easily adjust their mowing speed without constantly shifting gears, making it easier to navigate around obstacles or maneuver in tighter spaces. This feature significantly improves user experience and efficiency during mowing tasks.

Comfort is also a top priority in the design of the GR50. It features an ergonomically designed seat that is both adjustable and padded, allowing users to mow for extended periods without discomfort. The easy-to-use dashboard includes intuitive controls that enable quick adjustments and settings changes. This focus on user comfort and convenience makes the GR50 a delight to operate.

Furthermore, the Jonsered GR50 is designed with durability in mind. Its robust construction, combined with high-quality materials, ensures that it can withstand the rigors of regular use. This makes it a reliable investment for anyone looking to maintain their garden or lawn.

In summary, the Jonsered GR50 is a powerful, efficient, and comfortable garden tractor that embodies the perfect blend of technology and user-friendly features. With its strong engine, versatile cutting deck, hydrostatic transmission, and ergonomic design, it stands out as a top choice for gardening tasks. Whether for residential use or professional landscaping, the GR50 delivers exceptional performance and reliability.
Top Page Image Contents