Jonsered HTE2123 Transport position, Basic working techniques, Changing the hedge trimmer angle

WORKING TECHNIQUES

•Always wear heavy-duty gloves when repairing the cutting attachment. This is extremely sharp and can easily cause cuts.

•Store the machine out of reach of children.

•Use only original spare parts for repairs.

Basic working techniques

•Work with a swinging action from the bottom upwards when trimming sides.

•Adjust the throttle setting to suit the load.

•When trimming a hedge the engine should always face away from the hedge.

•Hold the machine as close to your body as possible to get the best balance.

•Make sure that the tip does not touch the ground.

•Do not rush the work, but work steadily until all the branches have been cut back cleanly.

Changing the hedge trimmer angle

•Undo the knob.

•Adjust the angle with the help of the handle on the cutting unit.

•Tighten the knob.

WARNING! Do not hold the cutting head

!when you adjust the angle. The blades are sharp and you could easily cut yourself.

Transport position

Once the work has been completed fold the cutting unit back against the shaft to simplify transport and storage of the hedge trimmer.

1Turn off the engine.

2Undo the knob.

English – 15