Manuals / Jura Capresso / Kitchen Appliance / Espresso Maker

Jura Capresso 65349R3 Old beans, Trouble Shooting, Insufficient Frothed Milk Production Make sure

Models: 65349R3

1 36
Download 36 pages 40.2 Kb
Page 33
Image 33

The closer the coffee spouts are to your cups, the less heat is lost in the air. The crema is more durable if the coffee flows down the inside of the cup, rather than hitting the bottom of the cup.

Old beans

Beans will lose aroma when sitting too long in the bean container. We recommend to fill just enough coffee beans into the bean container for up to three or four days.

32. TROUBLE SHOOTING

A. NO COFFEE COMES OUT OF THE COFFEE SPOUT Reason: Beans in bean container are not properly feeding into

the grinder because they are stuck together.

Solution: Stir beans before grinding. While grinding turn the grinding selector to the coarsest setting (chapter 7).

Reason: You used ground coffee in the Ground Coffee Funnel. The ground coffee was too fine.

Solution: Use ground coffee that is ground somewhat coarser. Reason: No water is transported through the system.

Solution: Remove water container and make sure that the connecting valve is free of any particles (like a coffee bean etc).

Reason: The ground coffee funnel or the internal brewing chamber is clogged.

Solution: Place a cup underneath the Dual Coffee Spout and run an extra rinse cycle. COFFEE READY

•Push and hold the Rotary Dial until display shows FILTER.

•Turn the dial until the display shows: MAINTENANCE

•Push the dial and select RINSE UNIT.

•Push the Rotary Dial again. Place a cup underneath the Dual

Coffee Spouts and push the Rinse Button.

COFFEE READY

B. THE DISPLAY READS FILL WATER BUT THERE IS ENOUGH WATER IN THE WATER TANK.

Reason: The low water floatation device (Fig. 10 "x") is missing.

Solution: Within the water tank is a small compartment. Inside is a small black floatation device. On top is a small clear plastic cover. This small plastic cover is missing and the floatation device is outside of the small compartment. Check if you can locate both pieces and reassemble. If you cannot find them, call 1-800-220-5701. We will send the pieces to you FREE OF CHARGE.

C. INSUFFICIENT FROTHED MILK PRODUCTION Make sure

•the dial of the Auto Cappuccino System points the frothing position (Fig. 5f).

•the venting tip (Fig. 5a) is clean (check if the flexible lip is free of any old milk residue).

•the Auto Cappuccino System is assembled tightly (chapter 12)

•all parts of the Auto Cappuccino System are clean and not

clogged with old milk residue

The milk you are using is "too heavy". "Half and Half" or liquid coffee creamers like "coffeemate" are too heavy to be siphoned fast enough through the system.

Skim milk will always produce more froth than whole milk.

D. GRINDER MAKES AN EXTREMELY LOUD NOISE; NO BEANS ARE GROUND

Reason: A stone is blocking the burr grinder.

•Turn the machine off. Unplug the machine.

•Open the Cover Lid and remove the Bean Container Safety Lid (Fig. 4).

33.

Page 32 Page 34
Page 33
Image 33
Jura Capresso 65349R3 warranty Old beans, Trouble Shooting, Insufficient Frothed Milk Production Make sure
Page 32 Page 34

65349R3 specifications

The Jura Capresso 65349R3 is a high-end coffee machine designed for enthusiasts who appreciate quality and convenience. With its sleek design and robust features, this machine is a favorite among coffee lovers looking to create café-quality espresso at home.

One of the main features of the Jura Capresso 65349R3 is its innovative brewing system. Equipped with a high-performance pump, it can reach a pressure of 15 bars, which is essential for extracting the rich flavors and aromas from coffee grounds. This ensures that every shot of espresso is brewed to perfection, delivering a full-bodied taste that rivals professional machines.

The machine comes with an integrated conical burr grinder that allows users to grind fresh coffee beans right before brewing. This not only maximizes the flavor but also ensures the coffee retains its freshness. Users can customize the grind settings to suit their taste preferences, ranging from fine for espresso to coarse for other coffee styles.

One of the standout technologies in the Jura Capresso 65349R3 is the Intelligent Pre-Brew Aroma System. This feature moistens the coffee grounds before brewing, allowing for optimal flavor extraction. Additionally, the machine is equipped with a programmable coffee strength selector, enabling users to choose their desired intensity from mild to strong.

The brewing unit is easily removable, making cleaning and maintenance a breeze. This is complemented by the automatic rinsing and cleaning program, which ensures the machine remains in top condition with minimal effort. The water reservoir also has a generous capacity, reducing the need for frequent refills.

Another key characteristic of the Jura Capresso 65349R3 is its user-friendly interface. The intuitive control panel features a clear display that guides users through the brewing process, making it suitable for both beginners and seasoned baristas. Furthermore, the machine offers various drink options, including espresso, cappuccino, and latte macchiato, all at the touch of a button.

The Jura Capresso 65349R3 also prioritizes energy efficiency, featuring an energy-saving mode that reduces power consumption when not in use. This not only benefits the environment but also helps users save on electricity bills.

In summary, the Jura Capresso 65349R3 is a versatile and technologically advanced coffee machine that combines aesthetics with functionality. Its superior brewing capabilities, customizable features, and ease of use make it an excellent choice for anyone looking to elevate their coffee experience at home.