Jura Capresso E30 manual Drawing off espresso/normal coffee, Drawing off espresso/strong coffee

7. Drawing off espresso/normal coffee

Switch on the machine by pressing button. The machine is ready as

soon as the warning lamp lights up.

Place 1 or 2 cups under the coffee-spout and press the appro- priate button. The pre-brew function (P.B.A.S©) moistens the coffee powder, briefly interrupts the flow and then the real brewing process begins.

Note: You can interrupt the flow of coffee at any time by simply pressing any one of the coffee buttons.

Tip: Adjust the coffee-spout height to the size of your cups to obtain a perfect head of froth (Fig. 3).

Place 1 or 2 cups under coffee-spout and press the coffee button required.

Important: Never use soluble instant coffee or quick coffee. Only use coffee powder from freshly ground beans or pre- ground vacuum-packed coffee. Never fill the funnel with

more than 1 or 2 portions at a time. The powder funnel is not intended as a storage container.

Note: If button is pressed by mistake, this can be cor- rected by pressing button . The machine rinses.

Tip: We recommend a regular cleaning of the funnel with a bottle-brush after drawing off powder coffee.

7.1 Drawing off espresso/strong coffee

Place 1 cup under coffee-spout (9) and press the required

button until the warning lamp lights up. Warning lamp flashes.

Note: You can only draw off 1 cup of strong coffee at a time.

7.2 Drawing off espresso/extra-strong coffee

Place 1 cup under coffee-spout (9).

Press the required button until warning lamps, , flash.

Note: You can only draw off 1 cup of extra-strong coffee at

atime.

7.3Using pre-ground powder coffee

Press button.Warning lamps and light up.

Now put 1 or 2 level measuring spoons of pre-ground coffee (Fig. 4) into the powder funnel (10).

8. Using steam

Steam can be used for heating up liquids as well as for frothing up milk for cappuccinos. To heat up liquids remember to push the frothing nozzle (14) up. For frothing up liquids push the nozzle down (Fig. 5).

Put a cup under the pivoting nozzle (13).

Immerse the frothing nozzle (14) into the milk you want to froth or into the liquid you want to heat up. Turn selector switch for coffee or hot-water/steam (12) to position (Fig. 5).

To stop steam-function turn selector switch for coffee or hot- water/steam (12) back to position .

Warning lamps , , , flash.

If you would like to draw off coffee right after drawing off steam, proceed as described in chapter 8.1.

Note: The max. drawing off time for steam is about 8 minu- tes. Due to the start frothing. This water should be drawn off before drawing off steam. However the perfect result (e.g. of frothing milk) is not influenced.

10