Switch on machine by pressing 
button.
Push button 
for about 3 seconds. Warning lamps 
, 
(if necessary) 
, 
light up.
Fill water tank.
Empty drip tray and grounds container and replace them. War- ning lamps 
(if necessary) 
go out.
Place a container under the
Put a Jura cleaning tablet (Fig. 9) into the powder funnel (10).
Press selector button 
. The warning lamp 
goes out.
Warning lamp 
flashes.
The flashing of warning lamp 
indicates that the cleaning process is activated.
If warning lamp 
lights up, empty drip tray (if necessary), wait about 10 seconds before replacing it. Warning lamp 
goes out.
Replace the container under the
.
The cleaning process is continued.
If warning lamp 
lights up again, empty drip tray (if neces- sary), wait about 10 seconds before replacing it. Warning lamp 
goes out.
Replace the container under the
.
The cleaning process is continued. At the end of it, warning lamp 
lights up.
Empty drip tray and grounds container and replace them.
Warning lamp 
lights up.
Replace container under the coffee spout (9) and press button
. The machine rinses and warning lamp 
lights up.
Tip: Clean powder funnel with a
13. Decalcifying
Your machine has an integrated decalcifying program. If a Claris fil- ter cartridge is used there is no need for decalcifying your machine. Please use Jura decalcifying tablets only. These are available from your Jura dealer
Note: If the machine needs decalcifying warning lamp 
lights up. You can still draw off coffee and
Important: Run the decalcifying program only after the ma- chine has been switched off for at least 2 hours and has cooled down completely. The decalcifying program is started with the machine switched off. The running decalcifying program must not be interrupted.
Switch off machine by pressing button | and let the machine | E |
|
cool down for 2 hours.
Then remove water tank.
Press button | for about 3 seconds. Warning lamps , , |
light up. |
|
Pour 0,5 litres of water into a container and completely dissolve the contents of a blister pack (2 tablets). Then fill the mixture in- to the water tank.
Empty drip tray and replace it. Warning lamps 
, 
, 
,
flash and warning lamp 
lights up.
Place a sufficiently big container under the pivoting nozzle (13). Turn selector switch for 
.
13
