Drawing off steam, Return to stand-by | Jura Capresso E70, E75

Never use water-soluble instant coffee or quick coffee. We recommend that you only use powder from freshly ground coffee beans or pre-ground, vacuum-packed coffee. Never put more than 2 portions of coffee in. The filler funnel is not a storage container. Make sure that the coffee powder which you use is not ground too finely. This can lead to blockages, and the coffee then only runs through drip by drip.

If draw-off key is pressed by mistake, the selection can be cancelled by pressing thee selection can be cancelled by pressing the rinsing key . Your machine rinses.

After drawing off powder coffee, we recommend that you re- gularly clean the filler funnel with a clean bottle-cleaning brush.

8. Drawing off steam

The steam can be used for heating liquids and also for frothing milk for cappuccino. Make sure that the frothing aid (15) is pushed upwards when heating liquids. When frothing liquids, push the frothing aid downwards (Fig. 5).

Place a cup under the pivoting nozzle (14).

Immerse the frothing aid (15) into the milk to be frothed or the liquid to be heated and turn the steam/hot water rotary button

(13)to the position (Fig. 5).

	STEAM	WATER / SELECT PRODUCT
Press the key .

STEAM INTAKE / PLEASE WAIT

STEAM INTAKE

When you have reached the required quantity of steam, turn the steam/hot water rotary knob back to the position .

STEAM INTAKE / SELECT PRODUCT

If you would like to draw off a coffee immediately after the steam, please proceed as described in point 8.1.

The max. draw-off time is about 4 minutes.

A little water will come out first when frothing. It can be let off before actually drawing off steam. The good result, e.g. when frothing milk, is not influenced in any way.

At the start of a steam draw-off, there can be splashes. The pivoting nozzle gets hot. Please avoid direct contact with the skin.