Insert filter, Replace filter, Replace Filter

12.8 Insert filter

Pull up the cartridge holder. Pressing gently, put the filter cartridge into the water tank (Fig. 7).

Close the cartridge holder until it engages audibly.

Fill the water tank with cold fresh tap water and put it back into the machine.

Switch the machine on with the ON/OFF switch.

Press the key P until you hear an acoustic signal.

FILTER NO

Press the key P, and an acoustic signal is heard

NO flashes

You can change the setting by pressing the keys and .

YES flashes.

To confirm, press the programming key P again until you hear an acoustic signal.

RINSE FILTER / OPEN TAP

Place a sufficiently large vessel (approx. 1 litre) under the pivoting nozzle (16) and turn the selector switch for coffee or hot water / steam to the position .

PLEASE WAIT/FILTER RINSING. The water draw-off stops automatically.

CLOSE TAP

SELECT PRODUCT

The water can be slightly discoloured (not dangerous to health)

12.9 Replace filter

After 50 litres have been drawn off, the filter loses its effect.

REPLACE FILTER / SELECT PRODUCT

If you do not draw off often, you should replace the filter cartridge every 2 months, but no report appears on the display. There is a special disk on the cartridge holder so that you can set the replace- ment date.

Switch your machine on with the ON/OFF switch.

Press the key P until you hear an acoustic signal.

FILTER YES

Press the key .
	REPLACE FILTER

	Empty the water tank and lift up the cartridge mounting.
	Pressing gently, put the new filter cartridge into the water tank
	(Fig. 7)
	Close the cartridge mounting until it engages audibly.
	Fill the water tank with cold fresh tap water and put it back into
	the machine again.	E
	Press the key P until you hear an acoustic signal.	E
	Press the key P until you hear an acoustic signal.

Display RINSE FILTER / OPEN TAP

Place a sufficiently large vessel (approx. 1 litre) under the pivoting nozzle (14) and turn the selector switch for coffee or hot water / steam to the position .