JVC 1001MKV*UN*SN Vcr, Recording deck, Random Assemble Editing R.A.Edit, SET REMOTE/VCR Code

VCR

(Recording deck)

			h
1	2	3	k
4	5	6
7	8	9	0

RM-V700U (optional)

Random Assemble Editing [R.A.Edit]

(GR-SXM480A/SXM280A only)

Create edited videos easily using your camcorder as the source player. You can select up to 8 “cuts” for automatic editing, in any order you like.

R.A.Edit is more easily performed when the RM-V700U MBR (Multi-Brand Remote,
pg. 24) is set to operate with your brand of VCR (see VCR CODE LIST), but can also be performed by operating the VCR manually.

Before operation, make sure the lithium battery is installed in the remote control RM-V700U.

Read the cautions in the instructions provided with the RM-V700U.

SET REMOTE/VCR CODE

1)Turn off t e power to the VCR and point the remote towards the VCR’s infrared sensor. Then, referring to the VCR CODE LIST on the left, press and hold MBR SET h, and press

button (A) and then (B).

•The code is automatically set once you release MBR SET h, and the VCR’s power comes on.

VCR CODE LIST67		24￿
VCR BRAND	BUTTONS3
NAME	(A) (B)
AKAI	9	7￿82
	13
BLAUPUNKT
FERGUSON
GRUNDIG	14
HITACHI	6	6￿3
JVC A	9	1￿63
B
C
MITSUBISHI	6
NEC	3	7￿8
PANASONIC	9481713￿

VCR BRAND	BUTTONS
NAME	(A) (B)
PHILIPS	7191￿2361459￿￿￿
SANYO	3	56￿
		1
SELECO,		1￿
REX	9
SHARP	1
SONY	36￿9`￿5￿
THOMSON,	9	6
TELEFUNKEN,
SABA,		7
NORDMENDE	32
TOSHIBA	6	19￿

2)Make sure the VCR’s power is on. Then, while holding VCR CTL k, press the button on the remote for the desired function. The functions the remote can control are PLAY, STOP, PAUSE, FF, REW and VCR REC STBY (you do not need to press VCR CTL kfor this one).

You are now ready to try Random Assemble Editing.

IMPORTANT

Although the MBR is compatible with JVC VCRs and those of many other makers, it may not work with yours or may offer limited functions.

•If the VCR’s power does not come on in step 1, try another code from the VCR CODE LIST.

•Some brands of VCR do not come on automatically. In this case, turn the power on manually and try step 2.

•If the remote control is not able to control the VCR, use the controls on the VCR.

•When the remote control’s battery runs out, the VCR brand you have set will be erased.

In that case, replace the old battery with a new one and reset the VCR brand.

26