JVC 50059704 manual Other Features, Source select, TV Status

The first letter of the selected name is high- lighted. To change that letter ““ / “” button can be used, and to select the other letters,

““ / “” button can be used. If the cursor is at the last letter of the Programme Name,

pressing “” button moves the cursor at the beginning. On the contrary, if the cursor is at the beginning of the Programme Name,

pressing ““ button moves the cursor at the end.

country

By pressing ““ / “” button, select country. "right/left to change country" is seen on the

screen. By pressing ““ / “” button, you should select the country where you are.

autoset

By pressing ““ / “” button, select autoset. "right/left to start aps function" is seen on

the screen. When ““ / “” or “OK” button is pressed, the following menu comes to the screen. If you want to cancel autoset function, press “MENU” button. You return to aps menu.

If you press “MENU” button after autoset is started, program table$ZLOOOO￿￿SUVWRUGEH￿appearsGHOFDQFHOWHG￿SURJUDPVon theVWDUWscreen.

￿0(18! ￿2.!

If “OK” button is pressed, autoset function starts and the following menuSFKDQQHOH￿PHQX￿ZDLWcomes￿VHDUFKLQJ￿￿RUWR￿FDQFHOto the￿screen.

After autoset is finalized, the program table comes to the screen.In the programme table you will see the programme numbers and names assigned to the programmes.

If you do not accept the locations and / or the programme names of programmes, you can change them in aps submenu in the settings menu. (See page 17 for Program table expla- nation.)

source select

By pressing ““ / “” button, select source select in settings menu. "<ok> to activate source selection menu" is seen on the

screen. By pressing ““ / “” or “OK” button, you can enter the source select menu.

66FDUW3&)WXQHU$￿9LGHR9￿￿￿5*% ULJKW￿WR￿VHOHFW￿VRXUFH

In source select menu, come on one of the sources by pressing ““ / “” button and

select it by pressing “” button. The source types are Tuner, Scart 1, Scart 1 RGB, Scart 2, Scart 2 RGB, PC, FAV and S-Video.

Other Features

TV Status

Programme Number, Programme Name and Sound Indicator are displayed on the up- per right side of the screen. Source is also displayed with them on the right bottom side of the screen. They are displayed after programme change during 3 seconds or

when “ ” button is pressed.

￿￿￿Programme Number

35￿￿￿￿ Programme Name (5 characters)

These OSD’s are displayed when a new pro- gramme is entered by digit button, by press-

ing “ ” or “ ” button or “BACK” but- ton.

Pressing “ ” button when PC mode se- lected shows sound indicator and the resolu- tion of the screen.

When “ ” button is pressed twice the cur-

ENGLISH - 18 -