Setting up your TV
Connecting the aerial and video cassette recorder (VCR)
Connecting the power cord to the AC outlet
•Aerial cable is not supplied. Use a good quality
•Read the manual that came with the VCR before connecting.
If not connecting a VCR (follow 1):
Connect an aerial cable to the aerial socket on this TV.
If connecting a VCR:
1Connect the aerial cable to the aerial input socket on the VCR, and connect the VCR and TV with another aerial cable
2Connect the VCR’s VIDEO OUT (video output) terminal and the TV’s VIDEO terminal with a video cable
To connect a VCR to the TV with an
Note that the connection with a video cable will be ignored in case you connect a VCR to the TV with both video cable and
3Connect the VCR’s VIDEO OUT (audio L/R output) terminals and the TV’s AUDIO input terminals with an audio cable
•To connect additional external devices, please see “Connecting the external equipment” on page 27.
•If the VCR's audio output is in mono, connect the VCR's AUDIO
OUT(audio output)terminal and the TV's audio L/MONO input terminal with an audio cable.
If you are connecting a AC adapter, follow 
in the diagram below.
• Connect 
to the TV and 
to the AC outlet.
Caution
•Operate only from the power source specified (AC 100
–240 V, 50/60 Hz) on the unit.
•Remove the AC plug from the outlet to completely disconnect the TV from the power supply.
VIDEO
L/MONO
R
Y
Pb/Cb
Pr/Cr
L/MONO
R
A
B
| ||
VIDEO | VIDEO | |
VIDEO |
| |
L/MONO AUDIO | VIDEO | |
R | L/MONO | |
2 | AUDIO | |
Y | ||
R | ||
Pb/Cb | ||
PR/CR | COMPONENT | |
L/MONO AUDIO | ||
R | ||
| Y | |
| Pb/Cb | |
| Pr/Cr | |
| L/MONO | |
| AUDIO | |
| R |
1
B
A
6