CHARGE Lamp
Status | Condition |
|
|
Charging | The lamp lights up. |
|
|
Charging completed | The lamp lights off. |
|
|
Charging standby mode | The lamp blinks. |
|
|
●The battery charger processes electricity internally, and will become warm during use. This is normal. Make sure to use the battery charger in
●If the battery operation time remains extremely short even after having been fully charged, the battery is worn out and needs to be replaced. Please purchase a new one.
During Use . . .
●The charging begins in the order of battery attachment.
•When the first battery charging is completed, the other charging starts.
•The charging on the mount “1” begins first when two batteries are attached simultaneously or the AC power cord is plugged into AC outlet after the battery packs are attached.
●You can use any of the mount when you charge only one battery.
●The battery charger is specifically designed to charge the battery packs
●When charging a brand new battery pack, or one that has been in storage for an extended period, the CHARGE lamp may not come on. In this case, remove the battery pack, then reattach and try charging again.
●Vibration noise can sometimes be heard coming from the inside of the battery charger. This is normal.
Specifications
Power | AC 110 V – 240 Vd, 50/60 Hz | |
Output power | DC 8.4 V | , 0.65 A |
|
|
|
Charging | 10°C to 35°C |
|
temperature |
|
|
|
| |
Dimensions | 128 mm (W) x 41 mm (H) x | |
| 65 mm (D) |
|
|
|
|
Weight | Approx. 160 g |
|
|
|
|
EN 7