JVC AA-V90U manual Supply Power to Charger, Attach BATTERY/BATTERIES, Confirm Status

1 SUPPLY POWER TO CHARGER

Plug the AC Adapter/Charger's power cord in to an AC outlet. The power indicator comes on.

2 ATTACH BATTERY/BATTERIES

Remove the battery pack’s protective cap and attach while making sure the marks are facing down and aligned with the corresponding marks on the AC Power Adapter/Charger.

•The Charge Indicator (1 or 2) begins blinking to indicate charging has started.

3 CONFIRM STATUS

When the charger indicator stops blinking but stays lit, charging is finished.

•If two batteries are attached to the charger, they will be charged in the order that they were attached.

4 DETACH BATTERY/BATTERIES Slide the battery or batteries in the direction of the arrow and lift off. •Remember to unplug the AC Adapter/

Charger's power cord from an AC outlet.

NOTE:

Perform charging where the temperature is between 10° and 35°C. (20°–25°C is the ideal temperature range for charging.) If the environment is too cold, charging may be incomplete.

BATTERY PACK CHARGING TIME

Battery Pack	1 Battery Pack	2 Battery Packs
BN-V907U	approx.	approx.
	100 min.*	200 min.*

*When charged at temperatures between 20° and 25°C.

•When charging Battery Packs after a long storage period, charging time will be longer than the time indicated above.

EN-5