Button Functions

Return +

The RETURN+ button has two functions:

Return - Returns to the channel viewed just before the channel currently onscreen.

Return+ - Lets you program a specific channel to return to while scanning through the channels using the CH+ and CH– buttons.

RETURN+ and hold for three seconds

������ �������

�����������

The channel currently active has been programmed as your return+ channel. Now scan through

the channels using the CHANNEL+/– buttons.

RETURN+

You will return to your programmed channel.

To cancel your Return+ channel, press and hold the RETURN+ button for three seconds. The message “RETURN CHANNEL CANCELLED!” will appear.

Return+ works only with the CH+/– buttons. Pressing any number key will cancel Return+.

Input

Selects the signal input source for the television: TV (for Antenna or Cable) or Video-1, 2, or V2-Component, or Video-3 for video devices like VCR’s, DVD players, or camcorders.

Press the INPUT button

By pressing the INPUT button, you can change the mode

�� ������� ������� ������������ �������

Note:

You can also access the input menu screen by using the MENU button on the front of the TV instead of the remote control. It appears between INITIAL SETUP and PICTURE ADJUST

screen. Choose the INPUT by pressing MENUon the front panel and select TV or VIDEO INPUT by using the CHANNEL +/- buttons ( OPERATE ® ).

42

Page 42
Image 42
JVC AV-20F475 manual Return +, Input