8
Basic setting for picture
COLOUR SYSTEM
You can select the appropriate colour systemwhen the picture is not clear or no colourappears.Press the COLOUR SYSTEM button to select asetting.
AUTO PAL SECAM
NTSC3.58NTSC4.43To operate this function with a menu:❇MENU PICTURE PICTURE FEATURESCOLOUR SYSTEMFor the colour system in each country or region,see the table below:
Area Country or Region System
Bahrain, Kuwait, Oman, Qatar,
United Arab Emirates, Yemen, etc. PAL
Indonesia, Malaysia, Singapore,
Asia, Middle Thailand, India, etc.
East China, Vietnam, etc. PAL
Hong Kong, etc. PAL
Islamic Republic of Iran, Lebanon, SECAM
Saudi Arabia, etc.
Philippines, Taiwan, Myanmar, etc. NTSC
Russia, etc. SECAM
Europe Czech Republic, Poland, etc. PAL
Germany, Holland, Belgium, etc. PAL
UK, etc. PAL
Oceania Australia, New Zealand, etc. PAL
Republic of South Africa, etc. PAL
Africa Nigeria, etc. PAL
Egypt, Morocco, etc. SECAM
PICTURE MODEYou can choose the desired picture setting withone-touch.Press the PICTURE MODE button to select asetting.
SOFT Softens contrast and sharpness.
BRIGHT Heightens contrast and sharpness.
STANDARD Standard picture setting.
USER You can change this picture setting
as you like.
Select USER and adjust following
items in the PICTURE SETTING menu.
(CONTRAST, BRIGHT, SHARP, COLOUR,
TINT*)
*TINT can only be adjusted in NTSC system.To operate this function with a menu:❇
MENU PICTURE PICTURE MODE
To return the USER setting to the default, pressthe blue button when the PICTURE SETTINGmenu appears.

Adjusting the picture - USER

You can adjust the desired picture setting whenselecting USER in PICTURE MODE.1Select the USER in PICTURE MODE underPICTURE menu.❇ USER
MENU PICTURE PICTURE MODE
2Select the PICTURE SETTING in PICTUREmenu, then adjust the setting.❇
MENU PICTURE PICTURE SETTING
CONTRAST 2 : Lower contrast 3 : Higher contrast
BRIGHT 2 : Darker 3 : Brighter
SHARP 2 : Softer 3 : Higher
COLOUR 2 : Lighter 3 : Deeper
TINT* 2 : Reddish 3 : Greenish
*TINT can only be adjusted in NTSC system.

PICTURE BOOSTER

(AV-21YMG4/AV-21YMT4 only)You can improve picture clarity when the pictureis unclear due to the low signal reception.Press the PICTURE BOOSTER button to select thedesired mode.❇MENU PICTURE PICTURE FEATURESPICTURE BOOSTER
HIGH Perform at maximum level.
LOW Perform at minimum level.
OFF Cancel the function.

WHITE BALANCE

You can change the white balance of the pictureto better match the type of video being viewed.Select the WHITE BALANCE in the PICTUREmenu, then choose the desired setting.❇
MENU PICTURE WHITE BALANCE
NORMAL Normal white balance.
COOL Bluish white.
WARM Reddish white.
❇About the basic operations of the menu,
please see the “How to operate menus
and menus locations” on page 4.
GGT0037-001B-H_E_P02-15 7/22/04, 12:118