Using Your HouseMate
WARNING: Before filling boiler with water, be sure power is off and unit has completely cooled down.
ξ | Fill the bottle (K) with Distillated |
|
|
| or Tap Water. |
|
|
ξ | Apply downward pressure to the |
|
|
| boiler cap (8) and unscrew by |
|
|
| turning it anticlockwise; Fig 2. |
|
|
ξ | Turn the fill water bottle (K) |
|
|
| upside down on the boiler |
| Fig. 1 |
| opening and apply downward |
| |
|
|
| |
| pressure on the bottle to fill the |
|
|
| boiler; Fig 2. |
|
|
ξ | Screw back the boiler cap (8) by |
|
|
|
| ||
| turning it clockwise while |
|
|
| simultaneously applying |
|
|
| downward pressure; ensure the |
|
|
| boiler cap is securely tight. |
|
|
ξ | Remove the water tank cover |
|
|
| (5), fill the water tank (1) with 34 |
|
|
| ounces of tap water and lock the |
|
|
| cover back into locked position. |
|
|
| This operation will ensure that |
|
|
| the air is filtered and any |
| Fig. 2 |
|
| ||
| impurities (Dust, Mites, etc.) are |
| |
|
|
| |
| trapped. For proper use, do not |
|
|
| exceed the “Minimum” water |
|
|
|
|
| |
| level shown on the tank. Fig 3. |
|
|
ξ | Plug the A/C power cord into a |
|
|
| three prong electrical outlet. |
|
|
|
|
|
|
Fig. 3
Connecting the Accessories
WARNING: Failure to secure the accessories using the clasp provided can pose a hazard; the accessories can suddenly come off while the machine is in use.
The accessories can be connected directly to the handle of the work hose (E) or to the extension wands (A), when so required. To secure the accessories to each other, simply fit the male end of one into the female end of the other and rotate the locking clasp. Fig 4.
Fig. 4
All the following functions can be used with any one of the accessories provided:
ξ Steam Functions ξ Vacuum Functions
ξ Simultaneous Vacuum and Steam Functions
To remove the accessories:
ξ Stop the steam function by releasing the steam on/off button (F) on the handle of the work hose (E)
ξ Stop the vacuum function by releasing the vacuum on/off button (G) on the handle of the work hose (E)
ξ Rotate the accessories locking clasp. Fig. 4. Now, you can disconnect the accessories.
ξ Connecting the bristled frames to the brush (B). Two different types of frames can be attached to the large multifunction brush to clean and care for all surfaces:
ξ Bristled frame with rubber lip attachments (C), suitable for hard surfaces, for best steam collection.
ξ Bristled frame with attachments (D) suitable for loose and fitted carpets, etc…
ξ To change frames
ξ Connecting the nozzle (J) and small brushes (L)
The nozzle is especially suitable for the cleaning of:
|
| ξ Radiators, Sinks, Toilets, Showers |
6 | 7 | Walls, Tiles, and carpet stains. |
|