Preparation
6 Initial setting
When the TV is first turned on, it enters the initial setting mode, and the JVC logo is displayed. Follow the instructions on the
1Press the Main power button on the TV.
The POWER lamp lights. After the JVC logo has been displayed, the TV automatically switches to the auto program mode.
|
|
| MENU | 3 |
|
|
| AUTO CH PRESET | |
|
|
| CHANNEL SKIP |
|
|
|
| CLOSED CAPTION | |
|
|
| MTS STEREO | SAP MONO |
|
|
| ON AIR |
|
| SELECT BY | EXIT BY | ||
| OPERATE BY | DISPLAY | ||
|
|
|
|
|
POWER lamp | Main power button | |
DISPLAY DISPLAY | POWER | |
| ||
button |
| |
MENU | MENU t | |
buttons | ||
MENU m | ||
buttons |
| |
CHANNEL | VOLUME |
•The JVC logo does not appear if your TV has been turned on once before. In this case, use the AUTO CH PRESET functions to perform the initial settings. For details, see page 13.
2Press the MENU M buttons.
The sub-menu is displayed.
TUNER MODE:CABLE AIR
START |
|
SELECT BY | EXIT BY |
OPERATE BY | DISPLAY |
3Press the MENU M buttons to select “CABLE” or “AIR”.
4Press the MENU T buttons to select “START”.
5Press the MENU M buttons to start the AUTO CH PRESET function.
“>>>ON SEARCH” is displayed on the screen.
When all the TV channels that can be received on your TV have been preset, the display goes out and the AUTO CH PRESET function operation is completed.
To stop the AUTO CH PRESET function, press the MENU m buttons.
This completes initial setting.
6Now you’re ready to enjoy your JVC TV.
