6
Setting up your TV
CAUTION
• Turn off the equipment including the TV
before connecting.
1Connecting the aerial
If you connect a VCR, connect the aerial
output jack of your VCR and the aerial jack
on the TV with the aerial cable. Then
connect the output jacks of your VCR and
the VIDEO-1 input jacks of the TV with the
video cable and audio cables. For details,
see the manual of your VCR.
To RF
output
To audio/video
output
To aerial input
The illustration shown is just a sample. It may
not be same as your TV.
3Inserting batteries into the remote
control.
Insert two batteries by following the ª and
· polarities and inserting the · end first.
CAUTION:
Follow the cautions printed on the batteries.
Notes:
• Use AA/R6/UM-3 dry cell batteries.
• If the remote control does not work
properly, fit new batteries. The supplied
batteries are for testing, not regular use.
4Turn on the TV by pressing the main
power button.
JVC logo appears on the screen.
VHF/UHF outdoor aerial
Rear of the TV
VCR
VHF/UHF outdoor aerial
Rear of the TV
2Connecting the compatible main plug
to the AC outlet.
GGT0077-001A-H_E_P02-15 1/13/05, 18:126