17

To register the TV channels automatically

You can register the TV channels into the TV’s channel list
automatically.
1Display the INSTALL menu.
2Choose AUTO PROGRAM, then press the MENU/OK button.
AUTO PROGRAM function starts, and the channels received
are registered in the channel list (PR list) automatically.
3“SETUP TOUR RESTART?” appears.
To start the SETUP Press the MENU/OK button. Then proceed to
TOUR step 5 of “Setting up your TV” on page 8.
To skip the SETUP Press the Red button.
TOUR
4The EDIT menu appears.
To edit the channel Proceed to the Step 3 of “To edit the channel
list list (PR LIST)” on page 18.
If a channel is not Proceed to the Step 3 of “To register the
registered TV channels manually” on this page.
To exit the menu Press the MENU/OK button.
For details of “SETUP TOUR”, see page 8.

To register the TV channels manually

(MANUAL in the EDIT menu)

You can register the TV channels into the TV’s channel list manually.
1Display the INSTALL menu.
TV channel presetting
2Choose EDIT/MANUAL, then press the MENU/OK button.
EDIT menu appears.
3Choose the channel which you want to register.
4Press the blue button to activate the MANUAL function.
The sound system of the channel appears at the right of the
CH/CC number.
5Press the 3 button to choose an appropriate sound system.
For details, see “SOUND SYSTEM” on page 12.
6Press the green or red button to search for the TV channel.
Searching stops when a channel is found and displayed.
7Repeat step 5 until your desired TV channel appears
If the reception is poor Press the blue or yellow button to fine tune
the TV channel.
If noisy sound is heard Press the 3 button to choose an appropriate
sound system.
8Press the MENU/OK button to exit the menu.
❇About the basic operations of the menu, please see the “How
to operate menus and menus locations” on page 5.
EDIT
BACK ■
■
INSERT
OK
MOVE
■
DELETE
■
MANUAL
PR CH/CC
7 CH 09
8 CH 11
9 ■ CH 13
3
10
11
12
13
.
MENU INSTALL menu
❇
MENU INSTALL menu
❇
GGT0041-001A-H(11-20) 7/2/04, 5:45 PM17