V-Chip

Set Lock Code

Channel Guard and V-Chip settings are protected by a four-digit Lock Code. Your TV comes pre-set with a Lock Code of "0000". You may change the code to any four-digit number you wish. To change the Lock Code, follow the steps below.

Press the M

ENU button

❷ To SET LOCK CODE

➛❿ To operate

The lock icon appears

Press Z ERO to access the Lock Code

LOCK CODE

0 0 0 0

FINISH

The first digit will be highlighted

➛❿ To select the number ❷ To move to the next digit

Continue to follow these directions for all four numbers

❷ To FINISH

➛❿ To save settings and exit

Your Lock Code is now set.

NOTES:

After a power interruption you must reset the Lock Code.

Write your Lock Code number down and keep it hidden from potential viewers.

If you forget the Lock Code, a new code may be set using the steps listed above.

33

Page 33
Image 33
JVC AV-36230 manual Set Lock Code, Lock Code Finish, ❷ To SET Lock Code ❿ To operate, Press Z ERO to access the Lock Code