Troubleshooting
41
Thereis no power
Thereis no picture
orsound
Youcannot select a
certainchannel
Thepower turns off
byitself
Theclock is wrong
Thecolor quality
ispoor
TheOn Timer is
blinking
Thereare lines
acrossthe picture
Thepicture is spotted
Thereare double
pictures(ghosts)
Pictureis snowy
(imagenoise)
Screenis 80% black
Stereoor bilingual
programscan't be
heard
Staticelectricity
Youhear occasional
cracklingsounds
Remotecontrol is not
operatingproperly or
atall
•See if the power cord became unplugged.
•Check for a blown fuse or circuit breaker or a power outage.
•The antenna could be disconnected.
•The input mode could be set improperly. See page 38.
•The tuner (Auto Tuner Setup) could be set improperly. See page 20.
•The TV station may be having difficulties. Check to see if other stations are working.
•Check to see that the batteries are still working and properly installed.
•Make sure the remote has a clear sight path to the TV.
•Check that the TV/CATV switch is in the proper position.
•You may be too far from the TV. You must be within 23 feet (7 meters).
•Make sure the channels have been programmed. See "Channel Summary", page 20.
•Check to see if the channel is locked. See "Channel Summary - Lock" page 20.
•Make sure the set did not become unplugged.
•Perhaps the On/Off Timer is set. See page 35.
•Check to see if the Sleep Timer was set. See page 39.
•The power was interrupted and the clock was not reset. See page 34.
•There is a problem with the TV. Unplug the set and call for service.
•Tint and Color may be improperly adjusted. See page 31.
•The Video Status mode may be turned to the wrong setting. See page 40.
•There could be interference from another electrical appliance, such as a computer,
anotherTV or VCR. Move any such appliances further away from the TV.
•There could be interference from a high-wattage appliance, like a hairdryer or vacuum,
operatingnearby. Movethe antenna away from the appliance or change to a coaxial
cableconnection which is less prone to interference.
•A building or passing airplane can reflect the original signal and produce a second,
slightlydelayed one. Adjustyour antenna position.
•Your antenna may be damaged, disconnected or turned. Check the antenna
connection.If the antenna is damaged, replace it.
•The Closed Caption Text mode is on. Turn it off in the Closed Caption Menu, page 28.
•Make sure the MTS settings are correct. See "MTS" on page 33.
•It is normal to feel static electricity if you brush or touch the screen.
•It is normal for the TV to make crackling sounds when first turned on or off. Unless
thesound or picture become abnormal, this is fine.

PROBLEMS CHECK

Thereis no picture
beingdisplayed for
INPUT-2
•Check your AV Cables to make sure they are connected tightly and properly.
•In case you are connecting using component cables to V2, make sure you select
"V2-COMPONENT"by pressing the INPUT button. Seepage 13 and 38.
•In case you are connecting using composite cables to V2, make sure you select
"VIDEO-2"by pressing the INPUT button. Seepage 13 and 38.
AV-27\32S\C\WF35 English 41 4/16/04, 1:47:18 PM