EXT SETTING

3Press the ë buttons to choose a name.Then press the ébutton.

The LIST disappears and the name is assigned to the EXT terminal.

To erase a name assigned to the EXT terminal:

Choose a blank space.

4Press the ébutton to complete the set- ting.

The menu disappears.

Note:

∙You cannot assign an EXT terminal name not found in the name list (LIST).

■'8%%,1*

You can choose a signal source to be output from an EXT-2 terminal.

You can choose any one of the output signals of the device connected to the EXT terminal and the picture and sound from a TV channel you are currently viewing to output it to the EXT-2 terminal.

1Press the ì buttons to choose the EXT-2 terminal.2Press the ë buttons to choose an EXT terminal or TV.

The arrow in the menu represents a signal flow. The left side of the arrow denotes a signal source output from the EXT-2 terminal.

EXT-1/EXT-3/EXT-4:

The output signal of the device connected to an EXT terminal passes through the TV and is output from the EXT- 2 terminal.

TV:

The picture and sound of the TV channel you are currently viewing are output from the EXT-2 terminal.

3Press the ébutton to complete the set- ting.

The menu disappears.

Note:

∙During dubbing, you cannot turn off the TV. Turning off the TV also turns off the output from the EXT-2 ter- minal.

∙When you choose an EXT terminal as an output, you can view a TV programme or a picture from the other EXT terminal while dubbing the picture from a de- vice connected to the EXT terminal onto a VCR con- nected to the EXT-2 terminal.

∙The RGB signals from TV games cannot be out- put.Teletext programmes cannot be output.

53