28 B U T T O N F U N C T I O N S

NOTES:

Picture in Picture is available on the following models only:

AV-32D500

AV-27D500

ON/MOVE (Picture in Picture)

PIP allows you to view two pictures simultaneously.

(PIP) ON/MOVE

07

02

EXIT to turn PIP off

Note: The PIP channel and main screen channel will appear in the display momentarily right after you turn on PIP. You can leave them up permanently by pressing DISPLAY until you reach the mode.

Note: The PIP Screen is 1/9 of the regular screen size.

Once PIP is turned on, the ON/MOVE button operates the Move feature.

You can move the PIP window to any of the TV’s four corners.

ON/MOVE

FREEZE

You can freeze the picture in the main screen into the PIP window.

FREEZE

Note: When the PIP is off, pressing FREEZE takes a snapshot of the main screen and puts it into the PIP window… great for catching those mail order addresses.

Note: When the PIP is on FREEZE stops the PIP picture.

SWAP

You can swap the PIP picture and the main picture.

SWAP

CHANNEL –/+ For PIP

Change the channel in the PIP window.

CH –/+

SOURCE

You can select the source for the PIP window.

SOURCE

TV V-1 V-2

Note: Each press of the On/MOVE button will shift the PIP window one position.

Note: When the PIP screen has no signal, the PIP window will be blue.

Note: When you connect the component input (DVD) to V-2, the PIP window will be blue.

PIP NOTES

D-500 Series models have 2 Tuner PIP and can see two signals at once. This means you can view two channels at the same time.

In order for PIP to work, the TV must be set to "TV

mode".

If you use your VCR to play a video, the VCR will automatically switch your input to VCR mode. In VCR mode, the TV sees only one signal, that of the VCR. In order to view PIP, you then need to press the TV/VCR button on your VCRremote to switch back to TV mode.

Page 28
Image 28
JVC AV 27D200 manual Freeze, Swap, Source