Quick Setup

Connections

 

 

Notes:

Green, blue and red are the most common colors for DVD cables. Some models may vary colors. Please consult the user’s manual for your DVD player for more information.

Be careful not to confuse the red DVD cable with the red audio cable. It is best to complete one set of connections (DVD or audio output) before starting the other to avoid accidentally switching the cables.

If you use INPUT 2 (Component-In), for a DVD connection, you must select

"V2-COMPONENT" by pressing the INPUT button, for proper display of the DVD signal.

Progressive DVD players (players with an output scan of 31.5 KHz) will not work properly with this television. Set your DVD player’s output to “interlaced”, or non-progressive mode.

Diagram #3

Illustration of AV-32D304

Connecting to an External Amplifier

Illustration of AV-32D304

1)Connect a white composite cable from the LEFT AUDIO OUTPUT on the back of the TV to the LEFT AUDIO INPUT on the amplifier.

2)Connect a red composite cable from the RIGHT AUDIO OUTPUT on the back of the TV to the RIGHT AUDIO INPUT on the amplifier.

Notes:

Refer to your amplifier’s manual for more information.

You can use AUDIO OUTPUT for your home theater system.

13

Page 13
Image 13
JVC AV 36D104, AV 36D304, AV 32D104, AV-32D304, AV-36D304, AV-36D104, AV-32D104 manual Connecting to an External Amplifier