Remote Programming

Search Codes

Cable/Satellite Search Codes Function

1)Slide the first 2-Way Mode Selector switch to CATV.

2)Press the POWER and RETURN+ buttons. Hold for at least three seconds and release.

3)Press the POWER button on the remote, and see if the cable or satellite box responds.

4)If there was a response, press RETURN+. The codes are now set. If there was no

response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use the remote control that came with your equipment.

5)Press RETURN+ to exit.

VCR/DVD Search Codes Function

1)Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR” or “DVD”.

2)Press the VCR or DVD POWER and RETURN+ buttons. Hold for at least three seconds and release.

3)Press the VCR or DVD POWER button, and see if the VCR or DVD responds.

4)If there was a response, press RETURN+. The codes are now set. If there was no response, repeat Step 3. If you repeat Step 3 a total of 80 times for the VCR (30 times for the DVD player), and there is no response, use the remote control that came with your equipment.

5)Press RETURN+ to exit.

22

Page 22
Image 22
JVC AV 32D104, AV 36D304, AV 36D104 manual Cable/Satellite Search Codes Function, VCR/DVD Search Codes Function