For the Australian model
Stereo mini plug
(not supplied)
@Subwoofers (for CA-MXDK5 and MX-DK3)
•
•When connecting the speaker cords, match the polarity of the speaker terminals: (+) to (+) and
CA-MXDK5
¤Surround speakers (for CA-MXDK5 and MX-DK3)
From right surround speaker (not supplied)
From left surround speaker (not supplied)
•The surround speakers connected can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the surround signals recorded in DVD multi- channel discs.
#Main speakers
•When connecting the speaker cords, match the polarity of the speaker terminals: (+) to (+) and
From right | From left |
subwoofer | subwoofer |
MX-DK3
From the subwoofer
•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
From right |
|
|
|
|
|
|
|
|
|
|
| From left | ||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
|
|
|
| ||||||
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
| |||||||||
|
|
|
|
|
|
|
| |||||||||
main speaker |
|
|
|
|
|
|
|
|
| main speaker | ||||||
| ||||||||||||||||
•Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the unit.
•The speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, it may cause color distortions. So, pay attention to the following when installing the speakers.
–When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers.
Then wait at least 30 minutes before turning on the TV’s main power switch again.
Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.
•DO NOT connect more than one speaker to each terminal.
•DO NOT push or pull the speakers as this will damage the foot spacers at the bottom of the speakers.
5