‹Voltage Selector

Use a screwdriver to rotate the voltage selector so that the voltage mark is pointing to the same voltage as where you are plugging in the unit. (See also the back cover page.)

When your mains lead (AC)

When your mains lead (AC)

line voltage is 230-240V

line voltage is 220 V

Voltage mark

Voltage mark

When your mains lead (AC)

When your mains lead (AC)

line voltage is 110V

line voltage is 127 V

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Voltage mark

Voltage mark

 

 

 

 

DO NOT plug in before setting the voltage selector on the rear of the unit and all connection procedures are complete.

Preparing the Remote Control

R6(SUM-3)/AA(15F)

DO NOT recharge, short, disassemble, heat the battery or dispose of it in a fire.

•Dispose of batteries in the proper manner, according to federal, state, and local regulations.

When using the remote control

Point the top of the remote control toward the remote sensor as directly as possible. If you operate it from a diagonal position, the operating range (approx. 5 m) may be shorter.

Changing the Color System and

Scanning Mode

Remote

INFO

 

ONLY

 

You can select the video output to match the color system of your TV (PAL or NTSC).

Also, CA-MXDK5 supports progressive scanning. If you connect a progressive TV through the COMPONENT jacks, you can enjoy a high quality picture from the built-in DVD player by selecting “PAL/NTSC PRG.”

1 Enter the color system setting mode.

(While holding...)

2 Select the color system and scanning mode.

 

 

 

 

PAL

 

PAL PRG*

 

 

 

 

 

 

 

 

 

NTSC PRG*

 

NTSC

 

 

 

 

 

 

 

 

 

 

 

 

 

PAL/NTSC

Interlaced scanning.

 

 

 

For a conventional TV.

 

 

 

 

 

 

 

 

PAL/NTSC PRG*

Progressive scanning.

 

 

 

For a progressive TV.

*Only for CA-MXDK5. PROGRESSIVE indicator lights on when progressive mode is selected.

3 Store the setting.

Canceling the Demonstration Main Unit

ONLY

When you plug in the AC power cord to a wall outlet, the System automatically starts the display demonstration.

2 sec.

DEMO OFF

DEMO START

To start the demonstration, select DEMO START.

6