~AM/FM antenna

To assemble the AM loop antennaTo connect AM/FM antenna

FM antenna (supplied)

Extend it so that you can obtain the best reception.

AM loop antenna (supplied)

Turn it until the best reception is obtained.

For better AM/FM reception

FM outdoor antenna (not supplied)

AM loop antenna (supplied)

Keep it connected.

Vinyl-covered wire (not supplied)

Extend it horizontally.

•Disconnect the supplied FM antenna, and connect to an outdoor FM antenna using a 75 Ω wire with coaxial type connector (IEC or DIN45325).

•Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception.

ŸTV/monitor

Green

Blue

Red

Component video cord (not supplied)

S-video cord

Composite video

cord (supplied)

(not supplied)

 

•Connect the VIDEO jack, S-VIDEO jack, or COMPONENT jacks (CA-MXDK5 only) whichever you want to use.

•To select progressive scanning mode (see page 6), use COMPONENT jacks (CA-MXDK5 only).

•To select the video output to match the color system of your TV (PAL or NTSC), see page 6.

!Digital audio component

Protective cap

•Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” preference display correctly according to the connected digital audio equipment (see page 35). If setting is incorrect, loud noise may be generated causing damage to the

speakers.

Digital audio signals are output from this System only when “DVD/CD” is selected as the source.

⁄Auxiliary equipment

Red

Stereo audio cord

 

(not supplied)

White

 

Continued on the next page...

4