English
Playing Back CDs
Loading CDs
On the unit ONLY:
1 Press 0for the disc tray (CD1 to 3) 
you want to load a CD onto.
The unit automatically turns on and the disc tray comes out. The Powered Rolling Panel also opens automatically.
Playing Back the Entire Discs — Continuous Play
You can play CDs continuously.
1 Load CDs.
2 Press one of the disc number | 3 |
| |
buttons (CD1, CD2, and CD3) for | 2 |
2 Place a disc correctly on the circle of the disc tray, with its label side up.
the disc you want to play.
CD play starts from the first track of the selected disc.
Tracks of the currently playing disc
1
CORRECT INCORRECT
•When using a CD single (8 cm), place it on the inner circle of the disc tray.
1 | 2 | 3 |
Track number | Elapsed playing time | |
3 Press the same 0you have pressed
in step 1. |
|
| • Pressing CD £·8instead of the disc number buttons |
|
| starts playing back if a CD is on the trays. | |
The disc tray closes, and the corresponding |
|
| |
|
| To stop during play, press 7. | |
disc indicator (CD1 to CD3) lights up on the |
|
| |
| |||
|
|
display.
To remove the disc, press 0 for the corresponding disc tray.
4 Repeat steps 1 to 3 to place other CDs.
When loading more than one CD continuously
When you press 0for the next tray you want to place another CD onto, the first disc tray automatically closes and then the next tray comes out.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
Disc number | 1 | 2 | 3 | |
|
|
|
| |
Disc indicator 
Disc marker
•The disc marker lights up for the disc number you have selected.
•The disc indicator flashes while the corresponding CD is being played.
•The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.
CD playback sequence
When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.
•When CD1 is pressed : CD1 ] CD2 ]CD3 (then stops)
•When CD2 is pressed : CD2 ] CD3 ]CD1 (then stops)
•When CD3 is pressed : CD3 ] CD1 ]CD2 (then stops)
*When only 2 CDs are loaded, they are played in the same order, but the disc tray without a CD is skipped.
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press 0corresponding to a CD, not playing or selected currently, to eject and exchange the CD.
If you exchange CDs during play, the current play will not stop until all CDs you have exchanged are played.
To stop play for a moment
Press CD £·8.
While pausing, the elapsed playing time flashes on the display.
To resume play, press CD £·8again.
– 15 –
