Playing Back Tapes

You can play back only type I (Normal) tapes.

To play the tapes in the decks B and A continuously

Playing Back a Tape

1 Press STOP/EJECT 7/0 for the deck you want to use.

For Deck A

For Deck B

2 Put a cassette in, with the exposed part of the tape down.3 Close the cassette holder gently.4 Press TAPE.

TAPE

5 Press PLAY 3.

The tape play starts.

When the tape plays to the end, the deck automatically stops.

To stop during play, press STOP/EJECT 7/0.To operate the other deck, press STOP/EJECT 7/0, then

PLAY 3on the other deck.

To fast wind to the left or to the right, press REW 1/

FF ¡ while the tape is not running.

To remove the cassette, press STOP/EJECT 7/0.
1 Set the cassette tapes in the decks A and B.

• If the tape direction is set wrong, replace the cassette.

2 Press PLAY 3 for the deck B.

The tape in the deck B begins to play.

3 Press PAUSE 8, then press PLAY 3for the deck A.

When the tape in the deck B ends, the tape in the deck A automatically begins to play.

PAUSE

The use of the C-120 or thinner tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch- rollers and the capstans.

– 16 –