•Be sure to turn down the volume before connecting or putting the headphones.
Adjusting the Sound:•This function also affects the sound through the headphones.
Setting the Clock:•“AM 12:00” flashes on the display until you set the clock.
•The clock may gain or lose 1 to 2 minutes per month. If this happens, set the clock again.
Advanced Disc/USB Mass Storage Class Device Operations (see pages 13 to 15)Programming the Playing•If you try to program a 33rd track, “PROGFUL” appears on the display.
•While programming steps...
Your entry will be ignored if you have tried to program an item number that does not exist on the disc (for example, selecting track 14 on a disc that only has 12 tracks).
Daily Timer Operations (see pages 16 and 17)
•When you unplug the AC power cord or if a power failure occurs, the timer will be canceled. You need to set the clock first, then the timer again.
Troubleshooting 
If you are having a problem with your System, check this list for a possible solution before calling for service.
General:
Adjustments or settings are suddenly canceled before you finish.]There is a time limit. Repeat the procedure again.
Operations are disabled.]The
]The path between the remote control and the remote sensor on the System is blocked.
]Point it at the remote sensor on the front panel.
]Move closer to the System.
]The batteries are exhausted.
No sound is heard from the speakers.]Speaker connections are incorrect or loose (see page 5).
]Headphones are connected (see page 7).
Radio Operations:
Hard to listen to broadcasts because of noise.]Antenna connections are incorrect or loose.
]The AM loop antenna is too close to the System.
]The FM antenna is not properly extended or positioned.
19