JVC CA-VSDT8, SP-VSDT8, VS-DT8 Using the Remote Control, COMPU Play

11
Getting Started
Using the Remote Control
The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7 m (23 feet) away.
The remote sensor at which you need to point the Remote Control differs depending on whether the Unit is placed vertically
or horizontally.
• Make sure that the "DISP.SET" switch on the rear of the Unit is set correctly.
COMPU Play
JVC’s COMPU PLAY feature lets you control the most frequently used System functions with a single touch.
With One Touch Operation you can play a CD, turn on the radio, or listen to an external equipment with a single press of the
play button for that function. One Touch Operation turns the power on for you, then starts the function you have specified. If
the System is not ready (no CD in place), the System still powers on so you can insert a CD.
How One Touch Operation works in each case is explained in the section dealing with that function.
The COMPU PLAY buttons are:
On the Remote Control
3/8 button
FM/AM button
MD/AUX button
On the Unit
3/8 button
SOURCE button
•The indicators for the buttons are invisible in Standby mode.
Check the position of the buttons while the System is turned on.
COMPACT COMPONENT SYSTEM
Remote sensor (when the Unit is placed vertically)
Remote sensor (when the Unit is placed horizontally)
• The maximum operating distance becomes short when
the Panel is opened.
COMPACT COMPONENT SYSTEM
VS-DT6-8(J)_EN.book Page 11 Monday, January 21, 2002 5:05 PM