Troubleshooting

 

Trouble

 

 

 

 

 

Cannot turn the

 

power on.

 

 

 

Cannot function

 

properly.
General

 

 

The burner or AC

 

adapter is hot.

 

 

 

 

 

The power lamp

 

blinks slowly in red

 

while using the

 

burner.

 

 

 

 

 

The burner is not

 

recognized by the

 

Everio camera.

 

 

 

 

 

The burner is not

 

recognized by the PC.

 

 

 

Writing fails.
Copy

 

 

 

 

 

Cannot open the disc

 

tray.

 

 

 

 

 

Unable to write/read

 

data at the maximum

 

speed (when

 

connected to a PC)

 

 

Action

zMake sure the AC adapter and power cord are properly connected. (P. 4)

zPress the power button on this burner for more than 5 seconds to reset the burner. (The burner will turn off automatically.)

zThe burner and AC adapter will become hot with prolonged use. This is not a malfunction.

zIf the burner is abnormally hot, remove the AC adapter and consult the dealer from which the burner is purchased.

zThe burner cannot function properly due to a drop in its interior temperature. Wait until the power lamp stops blinking.

zThere is a rise in the burner’s interior temperature. Turn off the burner, wait for a while then turn on again.

zMake sure the USB cable is connected properly. Insert the connector with the protrusion to the burner, and the other end to the Everio camera. (P. 14)

zMake sure the USB cable provided with the Everio camera is connected properly. (P. 16)

zUse discs recommended for the burner. (P. 48) zInsert the disc with the label facing up.

zWipe off any dirt that is found on the tray.

zUse discs for which the writing surface is not damaged.

zDo not use deformed discs.

zIf disc writing is currently in progress, the disc tray cannot be opened. Wait till the writing process ends.

zIf the disc cannot be properly ejected after the burner is dropped or due to other malfunctions, insert a thin rod into the force eject hole to eject the disc. (P. 44)

zUse the recommended discs. (P. 48)

EN

ES

41