INSTRUCTIONS
English
STEREO MICROPHONE
CU-V10U
Thank you for purchasing this stereo microphone. Before use, please read this instruction manual carefully to ensure proper use of this product, and keep this manual handy for future use.
GENERAL BATTERY CAUTIONS:
●When the battery is misused, there is a danger that it may leak or explode.
Please read the following cautions regarding proper use.
1.Insert the battery with its positive + and negative – poles positioned correctly as indicated.
2.Do not heat, disassemble, or throw it into a fire or short- circuit the terminals.
Please carefully read the instructions printed on the batteries.
ATTENTION:
Please note that the switch noise will be recorded if you change the stereo angle while recording.
PRECAUTIONS AND NOTES:
●The characteristics of the microphone will change if it is dropped or subjected to shock or excessive force from hitting it.
●During operation tests, please do not blow on the microphone or hit it. Just talk normally into the microphone.
●Precise parts are carefully arranged inside the microphone for optimum use, but these characteristics can not be retained if it is opened and disassembled. Please consult your nearest JVC dealer or contact a service center for repairs or maintenance.
●Please do not leave it near a heat source such as a stove, direct sunlight, or in a car with all windows closed where the temperature gets extremely hot. Direct exposure to a camera light will damage the microphone, causing its color to change and its body to deform.
●Avoid using the microphone in places where it is extremely humid, such as in a bathroom, or in areas subject to oily smoke and vapor, such as near a range, as this will cause it to malfunction.
INFORMATION
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation. Change or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
SPECIFICATIONS
Format | : Electret condenser type |
Directivity | : MS stereo with angle variation from |
| 0° – 120° (with a 90° |
Sensitivity | : – 45 dB (0 dB=1 V/Pa, at 1 kHz) |
Frequency | : 100 |
Output impedance | : 600 ü ±30% |
Maximum input sound |
|
pressure | : 100 dB S.P.L or more |
S/N ratio | : 63 dB or more |
Operating temperature | : 0°C – 40°C |
Power | : DC 1.5 V |
Power consumption | : Less than 1 mA (when a |
| used.) |
Battery duration | : Approx. 300 hours of continuous |
| use |
Output cord | : 20 cm with a |
| |
Dimensions | : 3.6 (W) x 4.7 (H) x 12.9 (L) cm |
Weight | : 75 g (not including the battery) |
Provided Accessories | : "AAA" battery |
| tests) ............................................. 1 |
E. & O. E. Design and specifications subject to change without notice.
