JVC DLA-G11U manual Connecting the Power Cord Supplied, To use the projector, Remove the lens cap

Connecting to Various Devices (Cont.)

Connecting the Power Cord (Supplied)

After all devices have finished being connected, connect the projector’s power cord. At this time, do not turn on the MAIN POWER switch yet.

1

Power cord (supplied)

2

CAUTION

To prevent fire and electric shock, observe the following:

•When you do not use devices, pull out their power cords from wall outlets.

•Do not connect the devices with power cords other than supplied.

•Do not use voltage other than the power voltage indicated.

•Do not scar, damage, or work on the power cords. Also, do not put a heavy object on, heat or pull the power cords, otherwise they may be damaged.

•Do not insert or pull out the plugs with a wet hand.

-

+

1Insert the supplied power cord

into the power input terminal (AC IN ~) of the projector.

AC IN ~

2Insert the plug of the supplied power cord into a wall outlet.

CAUTION

•Since the power requirement of the projector is high, be sure to insert the power plug directly into a wall outlet.

■To use the projector

•Remove the lens cap.

*The lens cap has a string attached and it is fixed to the projector.

Be sure to fit lens cap when not in use.

Lens cap

24