Caution

About Burning-in of D-ILA Device

Do not allow the same still picture to be pro- jected for a long time or an abnormally bright video image to be projected.

Do not project video images with a high intensity or high contrast on a screen. This video image could be burnt into this D-ILA device.

Pay special attention when projecting video games and computer program images.

There is no problem with ordinary video cassette playback images.

Viewing Conditions (Brightness of Room)

Brightness of the room

Avoid direct exposure of screen to direct sunlight and illumination. Block light using a curtain. Images can be well projected by darkening the brightness of the room.

Do not view screen for prolonged hours

Looking at the screen continually for a prolonged time will cause your eyes to get tired. Allow your eyes to rest at intervals.

Do not use this unit when image flickers due to installation conditions and environment.

This may cause your eyesight to deteriorate.

Environment of Use

Do not use this unit in rooms with cigarette smoke

Do not use this unit in rooms with cigarette smoke. This may cause the unit to malfunction.

When mounting this unit to ceiling

Check temperature around the unit.

When a heater is in use, the ceiling may reach a tem- perature higher than anticipated, hence leading to malfunction of the unit.

Maintenance Procedures

Clean dirt on the cabinet

with a soft cloth. In case of heavy soiling, soak a cloth in neutral detergent diluted with water, wring dry and wipe, followed by wiping again using a dry cloth.

Pay attention to the following as the cabinet may deteriorate in condition, get damaged or paint may come off.

Do not wipe with a stiff cloth

Do not wipe with force

Do not wipe with thinner or benzene

Do not spray volatile chemicals like insecticide

Do not allow prolonged contact with rubber or plastic products

Dirt on the lens

shall be cleaned using using commercial blowers or lens cleaning papers (for cleaning glasses and cameras).

Do not use fluid-type cleaning agents. This may lead to peeling of the surface coating film.

Lens surface is fragile. Avoid rubbing or knocking it.

Standard for gauging replacement time of components

There are replacement components required for maintenance of the functions of this product such as optical compo- nents, cooling fan and filters. Life span of components varies considerably with the frequency of use and environment in which they are used. For replacement of components (except filters), please consult your authorized dealer.

5