Controls and Features (continued)
Rear Side/Right Side/Bottom Surface
r
q
e
7 | Bottom Surface | |
t | ||
|
w
7
y
u
Blocked as it is not in use.
Opening it forcibly will cause
damage to the unit.
qConnector Panel
For details, please refer to ‘Connector Panel’. (☞ Page 9)
wLamp Cover
Remove this cover when replacing the lamp. (☞ Page 28)
eExhaust Vent
Warm air is expelled through this vent to keep the system cool. Do not block the exhaust vents.
rRemote Sensor (Rear)
When operating with the remote control, aim it towards this sensor. (☞ Page 17)
● A remote sensor is also located at the front of the unit.
tFront Adjustable Foot (for adjusting height and angle)
It is set at the lowest position when shipped from the fac- tory.
The foot can be adjusted to a maximum angle of +6° and a maximum length of 31 mm. (☞ Page 14)
yFilter
Cleans air drawn in from the air inlet.
Please clean this filter regularly. (☞ Page 31)
uRear Fixed Foot
8