JVC DLA-HD750 manual Input Signal Hdmi, Input Signal Comp

ENGLISH

4	Select the “Hue”, “Saturation” or “Brightness” using the					/	button.
5	Use the	/	button to adjust.
		Hue	7	Check	After
				TEST
● You can switch between “Before” and “After” using the [TEST] button of the remote control.
6	To end

BACK	BACK	BACK	Save Color Management?		OK
			Yes	No

Input Signal > HDMI

11HDMI

Configures HDMI input signal.

	Auto	Automatically configures the input signals.
Input	Standard	Select this when the dynamic range of the input images is
		16-235.
	Enhanced	Select this when the dynamic range of the input images is
		0-255.
	Auto	Automatically configures the input signals.
	YCbCr(4:4:4)	Select this when the Y Cb Cr(4:4:4) video signals are
Color Space		input.
	YCbCr(4:2:2)	Select this when the Y Cb Cr(4:2:2) video signals are
		input.
	RGB	Select this when the RGB video signals are input.
Control with HDMI	On	Enables CEC communications.
	Off	Disables CEC communications.

●The setting is available only if the HDMI terminal is selected.

●Abbreviation

CEC: Consumer Electronics Control

Input Signal > COMP.

12COMP.

Configures the input signal for the component video input terminals.

	Y Pb/Cb Pr/Cr	Select this when the component video signals are input.
Color Space	RGB	Select this when the RGB video signals are input.
	SCART	Select this when RGB video signals and sync signals are
		input via the SCART interface for European markets.

●The setting is available only if the component video terminals are selected.

Getting Started

Preparation

Basic Operation

Settings

Troubleshooting

Others

35