JVC DLA-RS4810 Setting up an iOS device, Connection and setup of a D-ILA projector and a router

1Setting up an iOS device

A In Settings, switch ON Wi-Fi.

BInside Choose a Network, look for the router in use and select it.

CConnection is complete when the Wi-Fi strength indicator appears at the top next to the signal strength indicator.

Note

Refer to the user manual of router in use for how to select a router, and connection between the router and iOS device. Connection is not possible using 3G or LTE network.

2Connection and setup of a D-ILA projector and a router

Cable connect the projector to a router for network setup.

Connection image

Wireless LAN LAN cable

iOS device Router

AOpen the projector menu. Go to Function → Communication Terminal, and choose LAN.

BOpen the projector menu again. Go to Function → Network, and turn ON the DHCP Client.

CSelect YES under Set → Apply Network Setting?

DAn IP address will be automatically assigned when network setup is successfully achieved. This completes network setup of the projector.

On

2