How to Change Menu Setting

The various features of this unit can be set using the menu. The setting value, which is stored in the internal memory will reappear upon turning on the power.

Example

Remote control of this unit can be achieved by using the RS-232C terminal on the rear panel.

[Configuration Menu]

[Initial Param Menu]

Display

8 / 9 / ; / :buttons

 

 

POWER

POWER

 

ON

 

MULTI FORMAT

FAULT

HIGH DEFINITION

ENTER ESC

TELEVISION

OFF

 

ENCODER

ENTER ESC button button

[Control Mode]

“Remote”

Operation Flow Chart

Press the ENTER button

Main Menu screen will be displayed.

Press the 8 / 9 buttons

Select the Configuration Menu.

Display Flow Chart

Main Menu

+ C o n f i g u r a t i o n M e n u

Main Menu

+ C o n f i g u r a t i o n M e n u

Press the ENTER button

Configuration Menu screen will be displayed.

Press the 8 / 9 buttons

Select the Initial Param Menu.

Press the ENTER button

Initial Param Menu screen will be displayed.

Press the 8 / 9 buttons

Select the Control Mode item and press the ENTER button.

Press the 8 / 9 buttons

Select the “Remote” and press the ENTER button.

Press the ESC button

C o n f i g u r a t i o n M e n u +Operate Param Menu

C o n f i g u r a t i o n M e n u + I n i t i a l P a r a m M e n u

I n i t i a l P a r a m M e n u >Control Mode :Local

I n i t i a l P a r a m M e n u >Control Mode: Local

I n i t i a l P a r a m M e n u >Control Mode:Remote

I n i t i a l P a r a m M e n u >Save & Reboot ?

Memo

The Operate Param Menu setting will be reflected in the output even if “Save & Reboot” is not executed.

Press the ENTER button

. . N o w I n i t i a l i z i n g . .

HDTV ENCODER

DM-JV600U

Caution

Do not turn off the power switch during “Now Initializ- ing” display.

The setting value may not be saved or may return to default setting.

16

Page 16
Image 16
JVC DM-JV600U manual How to Change Menu Setting, Press the Enter button, Press the 8 / 9 buttons, Press the ESC button