Manual
If your local TV station does not send date and time information, or sends incorrect information, you can set the clock manually.
1.Select the [Clock Set] > [Manual] option.
2.Press ENTER.
3.Enter the necessary information for year, date and time.
b / B (left/right): Moves the cursor to the previous or next column.
v / V (up/down): Changes the setting at the current cursor position.
4.Press ENTER to confirm your setting.
5.Press HOME to exit the Setup menu.
TV Aspect
4:3 Letter Box:
Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture.
4:3 Pan Scan:
Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off.
16:9 Wide:
Select when a 16:9 wide TV is connected.
Power Save Mode
Set Power Save Mode to [ON] to place your Recorder into an economic power save mode. Nothing is displayed in the display window when the unit is turned off.
Factory Set
You can reset the Recorder to its original factory settings.
1.Select the [Factory Set] option.
2.Press B to select [SET] then press ENTER.
3.Select [OK] and press ENTER.
4.Follow the Initial Setup Wizard on page 18.
Language Settings
Display Menu
Select a language for the Setup menu and information display.
\
Disc Menu / Audio / Subtitle
[Original] : Refers to the original language in which the disc was recorded.
[Others] : To select another language, press number buttons to enter the corresponding
[OFF] (for Disc Subtitle) : Turn off Subtitle.
HOOKUP AND SETTINGS
21