PBC

PBC stands for Playback Control and refers to special menus and navigation features that are available on some Video CDs.

[ON]: Video CDs are played according to the PBC, if available.

[OFF]: Video CDs are played the same way as Audio CDs.

AutoPlay

When you load a DVD with AutoPlay turned on, the Recorder will bypass the Disc menu and trailers and start playing the movie automatically.

Set [AutoPlay] to [ON] or [OFF].

DivX Registration Code DivX

We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod.

1.Select [About DivX(R)] option then press B.

2.Press ENTER while [Enter] is selected and the registration code will appear.

3.Use the registration code to purchase or rent the videos from Divx® VOD service at www.divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit.

Note:

All the downloaded videos from DivX® VOD can only be played back on this unit.

Remote Control Function

Remote Control A/B/C/D Code Switching

The remote control is capable of controlling four JVC video units independently. Each of the units can respond to one of four codes (A, B, C or D). The remote control is preset to send C code signals because your unit is initially set to respond to C code signals. You can easily modify your unit to respond to A, B or D code signals.

B/``

STANDBY/ON (1/&)

Number 1-4

STOP (x)

ENTER ( )

1.Press STANDBY/ON (1/&) on the unit to turn off the unit with no video tape inserted.

2.Press the number key “1” for A, “2” for B, “3” for

C or “4” for D while pressing ENTER ( ) down on the remote control.

3.Press N/`` on the unit for over 5 seconds while the unit is turned off. The current code appears on the display window.

4.Press STOP (x) on the remote control, the cur- rent code on the display window changes to new code and blinks for approximately 10 seconds.

5.The new code setup on unit and remote is done.

Note:

If the power is interrupted, the remote control code of this unit will change to “C”. You should reset the remote control code, if you want to change the code to A, B or D.

24