JVC FS-G2 Playing Back Tapes, Playing Back a Tape, On the unit ONLY, Press TAPE, Press # play

Playing Back Tapes

For tape operations, use buttons on the unit.

Playing Back a Tape

You can play back type I tapes only.

On the unit ONLY:

1 Press &/) (stop/cassette holder open).

The cassette holder opens.

2 Put a cassette in with the exposed part of the tape down.

3 Close the cassette holder gently.

4 Press TAPE. TAPE

The unit automatically turns on and the source changes to the tape deck.

• You can select to the tape by pressing TAPE on the remote control.

5 Press # (play).

The tape starts playing.

• When the end of the tape is reached, playing stops.

To stop playing, press &/).

To stop playing for a moment, press *.

To resume playing, press * again.

To fast forward or rewind the tape, press ⁄

or !.

• The fast forwarding or rewinding stops at the end of the tape.

To remove the cassette, press &/) while

playback is stopped.

• DO NOT turn off the unit while playing back or recording a tape. The cassette deck or tapes may be damaged.

•The use of C-120 or longer tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch rollers and the capstans.

•This unit is not compatible with type II and type IV tapes.

15