Manual background

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

 

 

Possible Cause

 

 

Action

Power does not come on.

The power cord is not connected to an

Insert the plug into the socket.

 

AC outlet.

 

 

 

 

 

 

 

 

 

 

No sound is heard.

Connections are incorrect or loose.

Check all connections and make

 

 

 

 

 

 

corrections. (See pages 6 and 7.)

 

A pair of headphones is connected.

Unplug the headphones from the

 

 

 

 

 

 

PHONES jack.

 

MP3 disc is recorded with “packet

It cannot be played. Replace the disc.

 

 

 

writing.”

 

 

 

 

 

 

 

 

 

 

English

Hard to listen to broadcasts because of

• Antennas are disconnected.

noise.

 

 

 

• The AM loop antenna is too close to

 

 

the unit.

 

• The FM antenna is not properly

 

 

extended and positioned.

 

 

 

The disc does not play.

The disc is upside down.

 

 

 

Specific files (tracks) on an MP3 disc are

Files other than MP3 are included in the

not played.

disc.

 

 

 

Impossible to record.

Small tabs on the back of the cassette are

 

removed.

 

 

 

Reconnect the antenna correctly and securely.

Change the position and direction of the AM loop antenna.

Extend FM antenna and orient to the best reception position.

Put the disc in with the label side up.

They cannot be played.

Cover the holes with adhesive tape.

Operations are disabled.

Unable to operate the unit by the remote control.

The built-in microprocessor has malfunctioned due to external electrical interference.

The path between the remote control and the remote sensor on the unit is blocked.

The batteries are exhausted.

You are using the remote control too far from the unit.

Unplug the AC power cord then plug it back in.

Remove the obstruction.

Replace the batteries. (See page 6.)

Signals cannot reach the remote sensor. Move closer to the unit.

22

Page 53
Image 53
JVC FS-G2 manual Troubleshooting, English, Symptom, Possible Cause, Action