English
Basic Disc Operations
While playing a disc, you can do the following operations.
To stop playing for a moment |
|
|
|
During play, press CD 3/8. | CD | ||
| |||
While pausing, the elapsed playing time flashes on |
|
|
|
|
|
| |
|
|
| |
the display. |
|
|
|
To resume playing, press CD 3/8 again.
3 Press ¢ or 4 to select the track number, then press PROGRAM.
Track number Program step number
PROGRAM
To go to another track
Before or during play, press ¢ or
4repeatedly.
•¢ : Skips to the beginning of the next or succeeding tracks.
•4 : Goes back to the beginning of the current or previous tracks.
To locate a particular point in a track
During play, press and hold ¢ or
4.
• ¢ :
•4 :
Programming the Track Playing Order
You can arrange the order in which tracks play before you start playing. You can program up to 60 tracks.
4 Repeat step 3 to program other tracks you want.
5 Press CD 3/8. | CD |
|
The tracks are played in the order you have programed.
If you try to program a 61st track
“FULL” will appear on the display.
To stop playing, press 7.
To check the program contents
Press PROGRAM repeatedly in stop mode. | PROGRAM | ||
The program number and track number are |
|
|
|
|
|
| |
displayed in succession. |
|
|
|
On the remote control ONLY:
1 Place a disc.
• If the current source is not the CD player, press CD.
2 Press PROGRAM. | PROGRAM |
|
The PROG (program) indicator starts flashing on the display.
•If a program has been stored in memory, the program is called up.
To modify the program
Press PROGRAM repeatedly in stop mode to | PROGRAM | ||
select the number which you want to change the |
|
|
|
|
|
| |
track, then repeat step 3 above. |
|
|
|
To clear the program
Press 7 in stop mode.
The PROG indicator disappears from the display.
•Pressing 0 OPEN to open the disc cover will also erase the programed tracks.
13
